Another graphics card question

[Guyinthedesert]

So, Our "IT" guy switched my graphics card back to the original ATI card, and was able to get a full refund at the "Store". Now my question is, with a $500 budget for a new card, what is the best choice? A lot of the work I do, I rely heavily on verify, I have my tool tolerance set to .0002, with full quality. I have found the results I get to be extremely accuarate. That being said, my main interest is Verify speed, without sacrificing verify quality. Also, I've always been curious why verify is so slow when doing helixes. A simple helix bore can take 2-3 min. WTF?

[gcode]

Quadro 2000 $435 at Amazon.com

 

A simple helix bore can take 2-3 min. WTF?

 

it should run much quicker than that if you have the "output arcs" box checked

 

 

 

[Guyinthedesert]

Quadro 2000 $435 at Amazon.com

 

 

 

it should run much quicker than that if you have the "output arcs" box checked

 

Yes, it should. For some reason, helixe scause it to choke. When I ran some verifies on a computer with a quadro card, it didn't slow up on helixes.

[JAMMAN]

Using a quadro 2000 right now, no graphics related problems at all.