C-axis post

[rchipper]

Greetings,

 

I have a project that requires c-axis programming and the current post that I have will only output the code below. Can anyone offer some advice?

How to find the .pst file to edit, how to check the current Machine control file and/or set up a new one or does anyone have a post for this machine to share. I was told that the .pst I'm trying previously output good/full machine code. Now it does not.

%

O0000

(DESCRIPTION)

N100 G30 U0 W0

N110 M01

N120 G30 U0 W0

N130 M01

N140 G80

N150 G30 U0 W0

N160 M01

N170 G80

N180 G30 U0W0

N190 M30

%

 

Thank you,

rchipper

[CJep]

I have a project that requires c-axis programming and the current post that I have will only output the code below.

 

Are you programing for a lathe?

 

Are you programing on the face or indexing around the dia?

 

What post are you using now?

 

How to find the .pst file to edit, how to check the current Machine control file and/or set up a new one or does anyone have a post for this machine to share.

 

Assuming you're using McamX6 the post file is located in the shared Mcamx6/lathe/posts folder in the shared documents location.

 

To check the machine, control def & post you have associated with your part file, open the machine group properties in the operations manager, select "files". Under the heading "machine toolpath copy" you will see the machine, control def & post you have associated. To change the current file select the icon "replace", this will open the cnc_machines folder and you can select a different machine def.

 

If you are programing for a C axis lathe the Generic Fanuc 4axis lathe post or the MplMaster (happens to be a free download here) is a good start.

 

A word of caution about asking for posts: Don't ask for posts.

 

If you need something more specific for your machine you can contact your reseller and they could either help you with edits or get you a quote for a custom post.

 

Oh,... and welcome to the forum.

[rchipper]

I am sorry!

 

This is new to me and I am quite embarrassed. Thank you for setting me straight.

 

I am using X5 currently.

 

Yes I am programming for a lathe.

 

I am programming a outer profile and several pockets around the

face of the part with drilled holes at the bottom of them.

 

The post I am using was apparently set up by one of the programmers prior to me. Although I did try

one called Lathe-c axis slant bed lathe and I got code but had to manipulate it for the machine I am

using, (reformat and code changes).

 

Thanks for the help and the kind welcome.

 

Sincerely,

rchipper

[K2csq7]

If you want to edit the "Lathe-c axis slant bed" post,

post the current vs. desired code here and we can help!

[CJep]

The McamX5 install uses the same folder format that McamX6 uses. The posts a re located in the shared directory.

 

If the post that comes with the Mcam install is not gettin' done then you could,...

 

1 - Get into the post and do the editing, (if you're new to Mcam you've got enough to think about without taking on post editing)

 

2 - contact your reseller about having a custom post written (some resellers will edit the post for you if they are minor edits, major format changes typically require a quoted post)

 

3 - use the post you have and keep hand editing (that would be my least favorite thing to do)

 

The post I am using was apparently set up by one of the programmers prior to me.

 

Sometimes cleaning up someone else's post edits is an exercise in WT WT were they thinkin'?

[rchipper]

If you want to edit the "Lathe-c axis slant bed" post,

post the current vs. desired code here and we can help!

 

K2csq7,

 

We are slowly making progress with this. I am not in a position nor am I asking to contract this out.

 

Thank you very much,

rchipper

[rchipper]

The McamX5 install uses the same folder format that McamX6 uses. The posts a re located in the shared directory.

 

If the post that comes with the Mcam install is not gettin' done then you could,...

 

1 - Get into the post and do the editing, (if you're new to Mcam you've got enough to think about without taking on post editing)

 

2 - contact your reseller about having a custom post written (some resellers will edit the post for you if they are minor edits, major format changes typically require a quoted post)

 

3 - use the post you have and keep hand editing (that would be my least favorite thing to do)

 

 

 

Sometimes cleaning up someone else's post edits is an exercise in WT WT were they thinkin'?

 

 

Boy isn't that the truth. Thank you for your time and input. I will follow up as needed.

 

rchipper

[EX-wccprogrammer]

K2csq7,

 

We are slowly making progress with this. I am not in a position nor am I asking to contract this out.

 

Thank you very much,

rchipper

He was not asking to take over the part, just asking for samples of current post output and desired post output. That way ppl on the forum can point you to the correct post edits.

[K2csq7]

Ex is right, I was offering to help you make the edits yourself.... that's what we do here.

The offer is on the table.

But I'd be glad to take $$$$

Black ops 2 comes out in Nov. & I gotta start saving!!!

[Guest CNC Apps Guy 1]

If you want to edit the "Lathe-c axis slant bed" post,

post the current vs. desired code here and we can help!

 

 

True dat! We ARE here to help.

[rchipper]

Got it.

That what my understanding was from the start. I worded my reply incorrectly guys, my apologies. Unfortunately, I am not in a position to offer $$$ in return for your services at this point. If thing do change for me I may take you up on it.

 

rchipper

[EX-wccprogrammer]

All help on the forum is free of charge. If you contract someone, then that is a different story, of course.

 

It never hurts to post away and see what kind of help is offered.

[K2csq7]

Got it.

Unfortunately, I am not in a position to offer $$ in return for your services at this point.

 

rchipper

 

I guess the 3 of us were not clear enough.

 

 

We will help you and expect nothing in return.

 

We will help you for free.

 

There is no charge for our help.

 

We don't get paid to help.

 

If you would like some help without paying for it, this is the place, we are the helpers that don't get paid.

 

 

 

[EX-wccprogrammer]

***

What is a "free" gift?

Aren't all gifts free?

***

***

How can there be self-help "groups"?

***

Something here seems to apply to this forum...

[rchipper]

I guess the 3 of us were not clear enough.

 

 

We will help you and expect nothing in return.

 

We will help you for free.

 

There is no charge for our help.

 

We don't get paid to help.

 

If you would like some help without paying for it, this is the place, we are the helpers that don't get paid.

 

 

OK so I am not the sharpest when it comes to these things. I admit it. Is your offer still on the table? I realy could use the help. Here are two program files, one is the code as it comes out and the other is the code that works for us. I noted this at the top of the pages. Is there anything else?

 

rchipper

[Guest CNC Apps Guy 1]

When doing post work, it REALLY helps to have a simple file that allows you to test all the scenarios you plan on encountering. On turning I usually do a simple OD Rough Canned Cycle (think shape like this "L" (yeah, that simple), Face Drill 2 positions (0 and 90), Cross Drill opposite 2 positions (180 and 270), Polar Interp a square on the end (1 pass with a lead in and lead out), a finish OD cycle (not canned usually as I like more control over intry and exit than is offered in canned), I add a simple groove and I toggle coolant on and off, alternating operations, drill cycle, an ID rough, and an ID finish. It's just way too hard to weed through a ton unnecessary codef. That should fit on 2 pages making it quite simple to see and edit.

 

ONce you do that, then post it out. Save a file as is. Then edit the file and save as *edited.NC. Attach NC files and the Mastercam file to a reply then we can go from there.

 

Helping fellow programmers is what a lot of us like to do. In my case, MANY people have been very generous to me with their knowledge and this is how I repay that generosity, I in turn pass it along and help others. That's how we roll at eMastercam. Users helping users.

[Mick]

I can totally agree with CNC Apps Guy 1. He, and a lot of others here, have helped me out immensely, and continue to do so. I'm down here in New Zealand, so it helps to have these contacts all over the world

 

I also agree about the "Test File" to use when tweaking posts. I have a few files I have used, that have passed from Version 9 right through to X6, when I can test posts

[K2csq7]

Here are two program files, one is the code as it comes out and the other is the code that works for us. I noted this at the top of the pages. Is there anything else?

 

rchipper

 

Glad you got it!

 

I don't see any attachments or posted code on your last post....

Maybe it's me, I did get really drunk for fathers day yesterday, my eyes aren't really working 100%.

 

 

[rchipper]

Glad you got it!

 

I don't see any attachments or posted code on your last post....

Maybe it's me, I did get really drunk for fathers day yesterday, my eyes aren't really working 100%.

 

I thought I attached 2 program files. I keep getting - Error you aren't permitted to upload this kind of file ???

[K2csq7]

Not sure, PM webby, he can tell you whats going on.

[bigjohn]

Click on "Other styles" and select "code" then paste your NC or pst code.

[rchipper]

Click on "Other styles" and select "code" then paste your NC or pst code.

 

Thank you. I am in out in the shop, production mode for a couple of days. I will try that when I get a sec.

 

rchipper

[rchipper]

Glad you got it!

 

I don't see any attachments or posted code on your last post....

Maybe it's me, I did get really drunk for fathers day yesterday, my eyes aren't really working 100%.

[rchipper]

(*THIS IS THE FORMAT/CODE USING THE C-AXIS SLANT BED POST*)
(*THAT I FOUND IN THE, shared mcamx5\CNC_MACHINES FOLDER*) 
(- I DELETED ALOT OF CODE BETWEEN THE START AND END -)
(- OF EACH TOOL TO REDUCE THE SIZE OF THE FILE -)
(- FOR THE LAST TOOL, 2.25 X 23 DEGREE, I USED C-Y AXIS -)
(- SLANT BED LATHE FROM THE SAME FOLDER -)

%
O0000
(PROGRAM NAME - C-AXIS SLANT BED POST 6-14-12)
(DATE=DD-MM-YY - 14-06-12 TIME=HH:MM - 12:57)
(MCX FILE - )
(NC FILE - )
(MATERIAL - STEEL INCH - 1030 - 200 BHN)
G20
(TOOL - 2 OFFSET - 0)
( 1/4 FLAT ENDMILL)
G0 T0200
M23
G0 G54 X4.9668 Z.5
C-12.292
G97 S2500 M52
Z.1
G98 G1 Z-.3 F8.44
G41 X4.9644 C-12.298
X4.7691 C-12.81
X4.7488 C-167.134
G40 X4.75 C-167.138
G0 Z.5
X3.6307 C-160.367
Z.1
G1 Z-.3
G41 X3.6298 C-160.404
X3.576 C-162.994
X2.4748 C-270.065
C-273.37
X2.4825 C-276.574
G40 X4.7154 C-373.79
G0 Z.5
G28 U0. W0. H0. M55
T0200
M01
(TOOL - 4 OFFSET - 4)
( 3/8 FLAT ENDMILL)
G0 T0404
G0 G54 X3.7302 Z.5
C-160.891
G97 S2500 M52
Z.1
G1 Z-.3 F8.44
G41 X3.7289 C-160.945
X3.6759 C-163.507
X3.5989 C-528.339
G40 X3.5981 C-528.398
G0 Z.5
( FACE POCKETS )
X3.021 C-593.479
Z.1
G1 Z-.138 F0.
G41 X3.0671 C-590.792
X2.9193 C-589.778
X2.9395 C-600.225
G40 X2.9687 C-597.371
G0 Z.5
X2.7736 C-636.801
Z.1
G1 Z-.138
X2.7722 C-635.252
G41 X2.773 C-633.701
X2.6237 C-633.628
X2.8076 C-644.164
G40 X2.7876 C-641.119
G0 Z.5
X3.2172 C-678.06
Z.1
G1 Z-.138
G41 X3.1739 C-675.484
X3.0204 C-676.293
X3.3468 C-683.926
G40 X3.2889 C-681.537
G0 Z.5
X4.6006 C-739.968
Z.1
G1 Z-.138
G41 X4.7158 C-738.786
X4.5952 C-736.909
X3.2196 C-745.526
G40 X3.3555 C-744.423
G0 Z.5
X4.0584 C-744.087
Z.1
G1 Z-.138 F8.44
X3.9562 C-741.961
X3.3154 C-721.093
G40 X3.2704 C-719.149
G0 Z.1
X4.0584 C-744.087
G1 Z-.138
X3.9562 C-741.961
X3.3154 C-721.093
G40 X3.2704 C-719.149
G0 Z.5
G28 U0. W0. H0. M55
T0400
M01
(TOOL - 6 OFFSET - 0)
( 3/8 SPOTDRILL)
G0 T0600
G0 G54 X1.9389 Z.25
C132.887
G97 S2500 M52
G81 Z-.278 R.1 F12.
X1.6727 C78.404
X2.2389 C30.503
X3.1603 C.148
G80
G28 U0. W0. H0. M55
T0600
M01
(TOOL - 8 OFFSET - 0)
( 17/64 DRILL)
G0 T0800
G0 G54 X3.1603 Z.25
C.148
G97 S2500 M52
G81 Z-.38 R.1 F15.
X2.2389 C30.503
X1.6727 C78.404
X1.9389 C132.887
G80
G28 U0. W0. H0. M55
T0800
M01
(TOOL - 5 OFFSET - 0)
(1/4 X 60 DEGREE ENGRAVING TOOL)
( 1/4 X 60 DEGREE ENGRAVING TOOL )
G0 T0500
M23
M8
G0 G54 X2.0114 Z4.
C-175.818
G97 S2500 M52
Z.02
G98 G1 Z-.01 F.01
X2.0068 C-181.522
Z.01
G0 Z4.
X1.9558 C-179.461
Z.02
G1 Z-.01
X1.9268 C-177.546
X1.8999 C-175.572
Z.01
G0 Z4.
X2.0076 C-177.797
Z.02
G1 Z-.01
X1.9558 C-179.461
X1.895 C-181.612
Z.01
G0 Z4.
X1.6843 C-176.612
Z.02
G1 Z-.01
X1.7506 C-176.74
X1.7169 C-175.099
Z.01
G0 Z4.
X1.5973 C-180.888
Z.02
G1 Z-.01
X1.5883 C-181.32
X1.489 C-174.347
Z.01
G0 Z4.
X1.3065 C-173.554
Z.02
G1 Z-.01
X1.299 C-178.039
X1.2728 C-175.515
Z.01
G0 Z4.
X1.0952 C-172.303
Z.02
G1 Z-.01
X1.0867 C-177.201
X1.0608 C-174.615
Z.01
G0 Z4.
X.9772 C-177.262
Z.02
G1 Z-.01
X.9202 C-177.092
X.8631 C-176.899
Z.01
G0 Z4.
X.8773 C-176.95
Z.02
G1 Z-.01
X.9202 C-177.092
X.9629 C-177.221
Z.01
G0 Z4.
X.7727 C-172.278
Z.02
G1 Z-.01
X.7387 C-177.657
X.6486 C-166.929
Z.01
G0 Z4.
X.6561 C-170.895
Z.02
G1 Z-.01
X.7145 C-171.644
X.7727 C-172.278
X.7954 C-169.373
Z.01
G0 Z4.
X.571 C-165.113
Z.02
G1 Z-.01
X.5574 C-171.844
X.4103 C-159.055
Z.01
G0 Z4.
X.3368 C-154.185
Z.02
G1 Z-.01
X.3177 C-162.651
X.3068 C-171.247
Z.01
G0 Z4.
X.1779 C-124.458
Z.02
G1 Z-.01
X.1596 C-113.182
X.1473 C-84.692
Z.01
G0 Z4.
X.1554 C-47.234
Z.02
G1 Z-.01
X.1722 C-48.56
X.1554 C-47.234
Z.01
G0 Z4.
X.2961 C4.793
Z.02
G1 Z-.01
X.3063 C6.876
X.4358 C-19.671
Z.01
G0 Z4.
X.5118 C-16.655
Z.02
G1 Z-.01
X.5668 C-15.
X.6222 C-13.637
Z.01
G0 Z4.
X.7058 C-9.3
Z.02
G1 Z-.01
X.7167 C-10.377
X.7058 C-9.3
Z.01
G0 Z4.
X.8939 C-9.445
Z.02
G1 Z-.01
X.9221 C-9.154
X.8821 C1.607
Z.01
G0 Z4.
X.9221 C-9.154
Z.02
G1 Z-.01
X.9503 C-8.88
Z.01
G0 Z4.
X1.0294 C-8.192
Z.02
G1 Z-.01
X1.086 C-7.763
X1.1427 C-7.376
Z.01
G0 Z4.
X1.2816 C-6.572
Z.02
G1 Z-.01
X1.2799 C-4.676
X1.2144 C2.516
Z.01
G0 Z4.
X1.4134 C1.003
Z.02
G1 Z-.01
X1.4428 C2.118
X1.4208 C-5.926
Z.01
G0 Z4.
X1.4492 C-5.809
Z.02
G1 Z-.01
X1.4776 C-5.697
Z.01
G0 Z4.
X1.5664 C-4.176
Z.02
G1 Z-.01
X1.5761 C-4.698
X1.5664 C-4.176
Z.01
G0 Z4.
X1.7536 C-4.798
Z.02
G1 Z-.01
X1.7821 C-4.721
X1.7477 C.811
Z.01
G0 Z4.
X1.7821 C-4.721
Z.02
G1 Z-.01
X1.8106 C-4.647
Z.01
G0 Z4.
X1.8883 C-3.592
Z.02
G1 Z-.01
X1.8939 C-3.79
X2.0063 C1.523
Z.01
G0 Z4.
X.8604 C-25.858
Z.02
G1 Z-.01
X.8745 C-23.356
X.9478 C-35.225
Z.01
G0 Z4.
X.9713 C-34.253
Z.02
G1 Z-.01
X.995 C-33.327
Z.01
G0 Z4.
X.8565 C-36.172
Z.02
G1 Z-.01
X.8474 C-34.99
X.8565 C-36.172
Z.01
G0 Z4.
X.7645 C-40.993
Z.02
G1 Z-.01
X.7415 C-39.652
X.7856 C-28.634
Z.01
G0 Z4.
X.5726 C-40.946
Z.02
G1 Z-.01
X.5769 C-36.939
X.6201 C-41.964
X.666 C-46.19
X.7152 C-49.855
X.6971 C-51.651
Z.01
G0 Z4.
X.7152 C-49.855
Z.02
G1 Z-.01
X.7339 C-48.15
Z.01
G0 Z4.
X.6096 C-55.746
Z.02
G1 Z-.01
X.5907 C-53.633
X.6096 C-55.746
Z.01
G0 Z4.
X.5257 C-74.061
Z.02
G1 Z-.01
X.5077 C-73.143
X.5257 C-74.061
Z.01
G0 Z4.
X.5024 C-86.572
Z.02
G1 Z-.01
X.4738 C-87.107
X.4025 C-69.269
Z.01
G0 Z4.
X.4504 C-97.319
Z.02
G1 Z-.01
X.4619 C-104.729
X.4785 C-111.021
Z.01
G0 Z4.
X.4736 C-109.408
Z.02
G1 Z-.01
X.4611 C-104.374
X.4524 C-99.114
Z.01
G0 Z4.
X.6018 C-114.718
Z.02
G1 Z-.01
X.5685 C-119.118
X.539 C-124.033
Z.01
G0 Z4.
X.5827 C-129.956
Z.02
G1 Z-.01
X.6219 C-126.996
X.6625 C-124.393
Z.01
G0 Z4.
X.6556 C-137.056
Z.02
G1 Z-.01
X.6899 C-139.648
X.7909 C-136.272
Z.01
G0 Z4.
X.8505 C-140.
Z.02
G1 Z-.01
X.8 C-144.531
X.9856 C-146.312
Z.01
G0 Z4.
X.7254 C-141.989
Z.02
G1 Z-.01
X.6957 C-145.236
X.5714 C-142.648
Z.01 F100.
G0 Z4.
M9
G28 U0. W0. H0. M55
T0500
M01
(TOOL - 8 OFFSET - 8)
( 1/4 CHAMFER MILL)
G0 T0808
M8
G0 G54 X3.23 Z4.
C-25.911
G97 S2500 M52
Z.1
G1 Z-.069 F20.
X3.3429 C-24.974 F.18
X3.3617 C-380.23
Z.031 F100.
G0 Z4.
M9
G28 U0. W0. H0. M55
T0800
M1
(TOOL - 10 OFFSET - 0)
(2.25 DIA X 23 DEGREE ANGLE TOOL)
G0 T1000
G17
M23
G0 G54 X-5.142 Y1.9754 Z4.
C0.
G97 S2500 M52
Z.1
G98 G1 Z-.285 F0.
G42 X-4.647 F.01
Y.8504
Y-.3937
Y-1.5187
G40 X-5.142
Z.1 F0.
G0 Z4.
X-4.942 Y1.9754
Z.1
G1 Z-.285
G42 X-4.447 F.01
Y.8504
Y-.3937
Y-1.5187
G40 X-4.942
Z.1 F0.
G0 Z4.
X-4.772 Y1.9754
Z.1
G1 Z-.285
G42 X-4.277 F.01
Y.8504
Y-.3937
Y-1.5187
G40 X-4.772
Z.1 F0.
G0 Z4.
X-4.752 Y1.9754
Z.1
G1 Z-.285
G42 X-4.257 F.01
Y.8504
Y-.3937
Y-1.5187
G40 X-4.752
Z.1 F0.
G0 Z4.
G28 U0. V0. W0. H0. M55
T1000
M30
%

(*THIS IS THE FOPRMAT/CODE THAT I WOULD LIKE TO GET*)
(- I DELETED ALOT OF CODE BETWEEN THE START AND END -)
(- OF EACH TOOL TO REDUCE THE SIZE OF THE FILE -)


O0000(P/N)
(12/06/12 - 10:56)
(PROGRAMMED BY, )
(Z0=FACE OF PART)

(TURRET 2 =1/4 DIA FLAT EMILL .25)
(TOOL 2,OFFSET 2)
(TURRET 4 =3/8 DIA EMILL .375)
(TOOL 4,OFFSET 4) 
(TURRET 6 =3/8 X 90 SPOTDRILL .375)
(TOOL 6,OFFSET 6)
(TURRET 8 =17/64 DRILL .2656)
(TOOL 8,OFFSET 8)
(TURRET 10 =1/4 X 60 DEGREE ENGRAVING TOOL)
(TOOL 10,OFFSET 10)
(TURRET 10 =1/4 CHAMFER MILL)
(TOOL 11,OFFSET 11)
(TURRET 10 =2.25 DIA X 23 DEGREE ANGLE TOOL)
(TOOL 12,OFFSET 12)

N200(TOOL 2=1/4 FLAT ENDMILL)
T020202
G28V0H0M43
G17G98M44
G50C0
G97S3000M8
G0Y0.Z4.M13
X4.9395
C-12.361
G1Z.1F50.
G1Z-.3F5.
G41X4.937C-12.367
X4.7424C-12.883
X4.7488C-167.134
G40X4.75C-167.138
G0Z.5
X3.6307C-160.367
G1Z.1F50.
G1Z-.3F8.5
G41X3.6298C-160.404
X3.576C-162.994
X2.4748C-270.065
C-273.37
X2.4825C-276.574
X4.7003C-373.471
G40X4.701C-373.484
G0Z1.M9
G30U0V0W0M15
G0M45
G28H0
G99M40
M1
N400(TOOL 4=3/8 FLAT ENDMILL)
T040404
G28V0H0M43
G17G98M44
G50C0.
G97S3000M8
G0Y0.Z4.M13
X3.7302
C-160.891
G1Z.1F50.
Z-.3F8.5
G41X3.7289C-160.945
X3.6759C-163.507
X3.5989C-528.339
G40X3.5981C-528.398
G0Z1.
X3.021C-593.479
G1Z.1F50.
Z-.138F8.5
G41X3.0671C-590.792
X2.9193C-589.778
X2.9395C-600.225
G40X2.9687C-597.371
G0Z1.
X2.7736C-636.801
G1Z.1F50.
Z-.138F8.5
X2.7722C-635.252
G41X2.773C-633.701
X2.6237C-633.628
X2.8076C-644.164
G40X2.7876C-641.119
G0Z1.
X3.2172C-678.06
G1Z.1F50.
Z-.138F8.5
G41X3.1739C-675.484
X3.0204C-676.293
X2.8712C-677.165
X3.3468C-683.926
G40X3.2889C-681.537
G0Z1.
X4.6006C-739.968
G1Z.1F50.
Z-.138F8.5
G41X4.7158C-738.786
X4.5952C-736.909
X3.2196C-745.526
G40X3.3555C-744.423
G0Z1.
X3.8524Y0.Z1.C-19.545
G1Z.1F50.
G98G1Z-.138F8.5
X3.7648C-17.252
X3.3154C-1.093
X3.2704C.851
G0Z.1
X3.8524C-19.545
G1Z-.138
X3.7648C-17.252
X3.3154C-1.093
X3.2704C.851
G0Z1.M9
G30U0V0W0M15
G0M45
G28H0
G99M40
M1
N600(TOOL 6=3/8 X SPOTDRILL .375)
T060606
G28V0H0M43
G17G98M44
G50C0
G97S3000M8
G0X1.9389Y0.Z1.C132.887M13
G1Z.1F50.
G198G81Z-.278R.1F12.
X3.1603C.148
G0Z1.M9
G30U0V0W0M15
G0M45
G28H0
G99M40
M1
N800(TOOL 8=17/64 DRILL .2656)
T080808
G28V0H0M43
G17G98M44
G50C0
G97S3000M8
G0X3.1603Y0.Z1.C.148M13
G1Z.1F50.
G198G81Z-.38R.1F8.
X2.2389C30.503
X1.9389C132.887
G0Z1.M9
G30U0V0W0M15
G0M45
G28H0
G99M40
M1
N1000(1/4 X 60 DEGREE ENGRAVING TOOL)
T101010
G28V0H0M43
G17G98M44
G50C0
G97S3000M8
G0 X2.0114 Z1.C-175.818M13
G1Z.02F20.
G1 Z-.01 F5.
X2.0076 C-177.797
X2.0068 C-181.522
G0 Z.01
X1.9558 C-179.461
G1 Z-.01 F5.
X1.9268 C-177.546
X1.8999 C-175.572
G0 Z.01 F5.
X2.0076 C-177.797
G1 Z-.01 F5.
X1.9558 C-179.461
X1.895 C-181.612
G0 Z.01
X1.6843 C-176.612
G1 Z-.01 F5.
X1.7506 C-176.74
X1.7169 C-175.099
G0 Z.01
X1.5973 C-180.888
G1 Z-.01 F5.
X1.5883 C-181.32
X1.5485 C-174.564
X1.489 C-174.347
G0 Z.01
X1.3065 C-173.554
G1 Z-.01 F5.
X1.299 C-178.039
X1.2728 C-175.515
G0 Z.01
X1.0952 C-172.303
G1 Z-.01 F5.
X1.0867 C-177.201
X1.0608 C-174.615
G0 Z.01
X.9772 C-177.262
G1 Z-.01 F5.
X.9202 C-177.092
X.8631 C-176.899
G0 Z.01
X.8773 C-176.95
G1 Z-.01 F5.
X.9202 C-177.092
X.9629 C-177.221
G0 Z.01
X.7727 C-172.278
G1 Z-.01
X.7387 C-177.657
X.6486 C-166.929
G0 Z.01
X.6561 C-170.895
G1 Z-.01 F5.
X.7145 C-171.644
X.7727 C-172.278
X.7954 C-169.373
G0 Z.01
X.571 C-165.113
G1 Z-.01 F5.
X.5574 C-171.844
X.3966 C-165.072
X.4103 C-159.055
G0 Z.01
X.3368 C-154.185
G1 Z-.01 F5.
X.3177 C-162.651
X.304 C-175.95
X.3068 C-171.247
G0 Z.01
X.1779 C-124.458
G1 Z-.01 F5.
X.1596 C-113.182
X.1473 C-84.692
G0 Z.01
X.1554 C-47.234
G1 Z-.01 F5.
X.1722 C-48.56
X.1554 C-47.234
G0 Z.01
X.2961 C4.793
G1 Z-.01 F5.
X.3063 C6.876
X.4358 C-19.671
G0 Z.01
X.5118 C-16.655
G1 Z-.01 F5.
X.5668 C-15.
X.6222 C-13.637
G0 Z.01
X.7058 C-9.3
G1 Z-.01 F5.
X.7167 C-10.377
X.7058 C-9.3
G0 Z.01
X.8939 C-9.445
G1 Z-.01 F5.
X.9221 C-9.154
X.8821 C1.607
G0 Z.01
X.9221 C-9.154
G1 Z-.01 F5.
X.9503 C-8.88
G0 Z.01
X1.0294 C-8.192
G1 Z-.01 F5.
X1.086 C-7.763
X1.1427 C-7.376
G0 Z.01
X1.2816 C-6.572
G1 Z-.01 F5.
X1.2799 C-4.676
X1.2144 C2.516
G0 Z.01
X1.4134 C1.003
G1 Z-.01 F5.
X1.4428 C2.118
X1.4208 C-5.926
G0 Z.01
X1.4492 C-5.809
G1 Z-.01 F5.
X1.4776 C-5.697
G0 Z.01
X1.5664 C-4.176
G1 Z-.01 F5.
X1.5761 C-4.698
X1.5664 C-4.176
G0 Z.01
X1.7536 C-4.798
G1 Z-.01 F5.
X1.7821 C-4.721
X1.7477 C.811
G0 Z.01
X1.7821 C-4.721
G1 Z-.01 F5.
X1.8106 C-4.647
G0 Z.01
X1.8883 C-3.592
G1 Z-.01 F5.
X1.8939 C-3.79
X2.0063 C1.523
G0 Z.01
X.8604 C-25.858
G1 Z-.01 F5.
X.8745 C-23.356
X.9478 C-35.225
G0 Z.01
X.9713 C-34.253
G1 Z-.01 F5.
X.995 C-33.327
G0 Z.01
X.8565 C-36.172
G1 Z-.01 F5.
X.8474 C-34.99
X.8565 C-36.172
G0 Z.01
X.7645 C-40.993
G1 Z-.01 F5.
X.7415 C-39.652
X.7856 C-28.634
G0 Z.01
X.5726 C-40.946
G1 Z-.01 F5.
X.5769 C-36.939
X.6971 C-51.651
G0 Z.01
X.7152 C-49.855
G1 Z-.01 F5.
X.7339 C-48.15
G0 Z.01
X.6096 C-55.746
G1 Z-.01 F5.
X.5907 C-53.633
X.6096 C-55.746
G0 Z.01
X.5257 C-74.061
G1 Z-.01 F5.
X.5077 C-73.143
X.54 C-75.447
X.5257 C-74.061
G0 Z.01
X.5024 C-86.572
G1 Z-.01 F5.
X.4738 C-87.107
X.4025 C-69.269
G0 Z.01
X.4504 C-97.319
G1 Z-.01 F5.
X.4619 C-104.729
X.4785 C-111.021
G0 Z.01
X.4736 C-109.408
G1 Z-.01 F5.
X.4611 C-104.374
X.4524 C-99.114
G0 Z.01
X.6018 C-114.718
G1 Z-.01 F5.
X.5685 C-119.118
X.527 C-122.675
X.539 C-124.033
G0 Z.01
X.5827 C-129.956
G1 Z-.01 F5.
X.6219 C-126.996
X.6625 C-124.393
G0 Z.01
X.6556 C-137.056
G1 Z-.01 F5.
X.6899 C-139.648
X.7909 C-136.272
G0 Z.01
G0 X.8505 C-140.
G1 Z-.01 F5.
X.8 C-144.531
X.7673 C-148.109
X.9856 C-146.312
G0 Z.01
G0 X.7254 C-141.989
G1 Z-.01 F5.
X.6957 C-145.236
X.5714 C-142.648
Z.01 
G0 Z4.
M9
G28 U0. W0. H0. M55
T0500
M01
N1100(1/4 CHAMFER MILL)
T101111
G28V0H0M43
G17G98M44
G50C0
G97S2500M8
G0Y0.Z1.M13
G0 G54 X3.23 Z4.
C-25.911
G97 S2500 M52
Z.1
G1 Z-.069 F20.
X3.3429 C-24.974 F.18
X3.4566 C-24.1
X3.4069 C-382.202
X3.3617 C-380.23
Z.031 F100.
G0 Z4.
M9
G28 U0. W0. H0. M55
T0800
M1
N1200(TOOL 10=2.25 DIA X 23 DEGREE ANGLE TOOL)
T101212
G28V0H0M43
G17G98M44
G50C0
G97S2500M8
G0Y0.Z1.M13
X-5.142 Y1.9754
Z.1
G1 Z-.285 F50.
G42 X-4.647 F10.
Y-1.5187
G40 X-5.142
Z.1 F50.
G0 Z1.
X-4.942 Y1.9754
Z.1
G1 Z-.285
G42 X-4.447 F10.
Y-1.5187
G40 X-4.942
Z.1 F50.
G0 Z1.
X-4.772 Y1.9754
Z.1
G1 Z-.285
G42 X-4.277 F10.
Y-1.5187
G40 X-4.772
Z.1 F50.
G0 Z1.
X-4.752 Y1.9754
Z.1
G1 Z-.285
G42 X-4.257 F10.
Y-1.5187
G40 X-4.752
Z.1 F50.
G0Z1.M9
G30U0V0W0M15
G0M45
G28H0
G99M40
M30
%

also the code for the c axis is extremely large?????

Glad you got it!

 

I don't see any attachments or posted code on your last post....

Maybe it's me, I did get really drunk for fathers day yesterday, my eyes aren't really working 100%.

[EX-wccprogrammer]

G1 Z-.3 F8.44
G41 X3.7289 C-160.945
X3.6759 C-163.507
X3.5989 C-528.339
G40 X3.5981 C-528.398
G0 Z.5

The tool header you desire is achievable, but you will need to modify the information put into a buffer. And create variables to hold the information that you have collected when retrieved. Then you need to write the code to format the information that you now have.

It would take longer to try to explain it, than it would take to do it. Probably about 4 hours to code and debug.

 

The above quoted code looks like a C-Axis 'wind up' error in the post. While engaged in a cut, X-Axis is moving .077 and C-Axis is 365 degrees. A little more complicated to deal with, since sometimes that is what is intended.

 

You have your work cut out for you. I would suggest maybe having a professional fix the post for you, or buy one from your reseller. Hope that helps you understand what is involved, and Good Luck!