check surface display color

[specprogrammer]

Is there a way to change to color of check surfaces. When I have an operation and I go back to maybe re-pick geometry, or check out what surfs I've used, the drive, and the check surfaces are displayed in the same color. This makes it hard to determine which is which. I've looked through config but didn't see anything.

[RObert TImby]

Yea, right click in the operation manager and you will see display options. on the lower left, there is thing called highlight geometry. check them and pick the color you desire.

[specprogrammer]

So do I right click on the operation, or the geometry icon, I think I'm missing something. When I go to select surfd it still highlights drive and ckeck in the same color.

[Brando]

if you are using solid surface selection, it does not change colors, with the solid both colors drive and check are coming from the select color in config, and also when you pick show drive or show check, or editing or re-selecting (as you said) it will show both and the same color

if you use surfaces it works as it should

[K2csq7]

So do I right click on the operation, or the geometry icon, I think I'm missing something. When I go to select surfd it still highlights drive and ckeck in the same color.

 

Just in the ops manager, not on an operation, just in the white (unless you changed the background color of the ops manager) space.