i used a shadow graph to reverse engineer the shape and drew a custom profile tool

double click the blue s icon in the chain manager to get a dropdown to get the individual chains

the Firepro for sure, google them, i have a 6800 at home not a bad card tho

update, i was working on a different old file this week updating some of the toolpaths to better methods, and was having graphics issues with points and face selection, i checked out the groups and it had the same deal with all the groups looking like that picture, it did say different things, but it did have "+++++++" all over the place, so i deleted them all, after that it was trouble free after deleting them, probably had the file open for a collective 10hours or so and didnt have anymore selection issues

if its a vertical haas , could be you have residual oil and compacted chips like a brick under the waycovers and your not getting all the bacteria out and its getting back in thru that drain tube that comes out from the back of the saddle

gonna throw this out there, i noticed something strange this morning, in the pic you see that there are groups named , i dont use this function, and i went thru a few files that i remember that were troublesome and they all have named groups that i didn't create, so i'm gonna delete them and then see if the problem comes back or not

i never knew about the right clicking thats awesome stuff!!!

hey man heres my settings for and optirest path, i believe this gives you the least amount of posted code as far as the line/arc to cut ratio ,increasing the total tolerance will reduce the amount of code as well

had the point selection crap out 2x this morning and regen display worked both times, again thank you!!

thanks for the tip dude!, i dont think i tried that one, i tried ram saver too, but definitely going to give regen display list a shot,(fingers crossed) LOL ,, Im going to start working on said part again tomorrow so hopefully it works like a champ for me too!!

no kidding had the exact problem ive had the problem pop up a couple times on this particular solid i was programming about 2 weeks ago and it was frustrating the heck out of me!, I've since not completed the program for it because of other priorities, but i couldn't figure it out, i haven't had a single problem with mc doing that since i haven't been working on that part, now the only thing thats really different for what ive been programming since, is that model has two areas that get splined and they're drawn on the model. we make a line of tools that are a scaled up/down in size and the one part we call the housing no matter what size will typically give me issues to some degree, such as optirest making some odd moves when the step over is set below a certain figure and the point selection issue, i have had some other ones that i cant think of right now i always thought i had something to do with an ati graphics card (got em at work and home), since i've read so many posts about the random nature of ati and how nvidia is the trouble free card to use im definitely going to send that file in to qc monday, also referencing this post, ive been busy as poop lately getting programs, setting up and maintenance hopefully we can get it figured out because its annoying and unproductive having to restart my computer to be able to pick a solid point

u could try the undefined tool type, and draw the exact profile of the tool, but im not sure about the undefined type working with all the surfacing paths

dang! cjep that reminds me of a place i worked at as a setup operator, and there was this small open bed style mill in the shop that always had tons of oil dry all around the front and i finally figured out why, it was because the day guy would chew cut tobacco and spit it in the oil dry!! NASTY!! but our ethic on the keeping the machines area clean is this, if anybody has time to bs talk or play with the cell phone they have time to clean up, this includes all employees, we bring current and potential customers in the shop so its gotta look impressive same thing goes with inside the machine, i put valves (its not that hard to do and its relatively inexpensive)on all the machines flood coolant pumps so they can shut the flood off to the spindle and hose the inside off, and be sure to caution operators not to use air guns or you'll end up with chips jammed in places they shouldn't be or piled up under the waycovers

Chris heres what you gotta do, right click in the blank toolbar space, the areas that you can do this are the light blue color on my screen, it will not open that window up if you are not in a blank toolbar space area, after you do, click on shading, then this will pop up somewhere on the screen, the 3 circled are the ones that control the look of the wireframe display on solids and fyi, you could also drag that shading toolbar into a blank space area and you can also save it so you always have it there if you wish hth br

hey man do you mean like this?, its in the shading toolbar after i posted this i thought you might be talking about having wireframe geometry display like that and the answer is i dont think so

im pretty sure ive experienced this as well (cant exactly remember the last time it happened), i figured it was because the the file i was working on or had been working on was from an x6 version

glad you got it all fixed up, but im curious was that a self inflicted post issue or a problem with the standard post you fixed?

i think its always posted like that, there are no options for rapid plunge on the threadmill page, i just change the feed rate on the plunge field (THREADMILL 3/8-16) (MC TOOLPATH# 18 ) T123 M06 (VARDEX 375-16 THD MILL) M62 (UNLOCK TABLE) G00 G17 G90 G54.1 P2 B0. X4.7013 Y5.6897 S2538 M03 M10 (LOCK TABLE) G94 G05.1 Q1 R5 G43 H123 Z2. Z.1001 G01 Z-.7299 F300. Y5.6782 F7. G41 D123 X4.6877 Y5.6897 G03 X4.7012 Y5.6605 Z-.7143 I.0136 J-.0114 X4.7012 Y5.6605 Z-.6518 I0. J.0292 X4.7148 Y5.6897 Z-.6362 I0. J.0178 G01 G40 X4.7013 Y5.6782 Y5.6897 Z-.7299 F300. Y5.6773 F7. G41 D123 X4.6799 Y5.6897 G03 X4.7012 Y5.6527 Z-.7143 I.0214 J-.0123 X4.7012 Y5.6527 Z-.6518 I0. J.037 X4.7226 Y5.6897 Z-.6362 I0. J.0247 G01 G40 X4.7013 Y5.6773 Y5.6897 Z-.7299 F300. Y5.6773 F7. G41 D123 X4.6799 Y5.6897 G03 X4.7012 Y5.6527 Z-.7143 I.0214 J-.0123 X4.7012 Y5.6527 Z-.6518 I0. J.037 X4.7226 Y5.6897 Z-.6362 I0. J.0247 G01 G40 X4.7013 Y5.6773 Y5.6897 G00 Z2. G05.1 Q0 G91 G30 Z0. G49 G90

actually thats what i wanted to type, i stopped in the middle of that reply to talk to someone and i guess i forgot what i wanted to say exactly lol

with x7mu2 , ive had that happen with dynamic transform, and sometimes stuff dosent hide after i select entities to keep on the screen, it dont know why, i wont duplicate on the other programmers computer when he opens it,and hes had that happen on his as well but it wont duplicate when i open his , it happens on such a rare occasion, i dont spend hours to investigate why, i just work around it and move on but you could try using the repaint screen(found under view), regenerate display list(found under screen) or the ram saver (under settings), those might work instead of reloading, usually one of those three fixes it for that session and until i save\close\open it up again i dont have anymore problems

tell the supervisor to get a quote for new waycovers and chip auger motors, after he sees how much that stuff costs he should be more than willing to light a fire under your operators butt

i definitely agree guys , i've used that technique before but on this job the cycle time was more a concern than maximum tool life, there is a wire edm and fab welding op after this one and they take forever and a year to complete and at the time the customer needed them yesterday jeff 1000spm is pretty quick for 4000 anneled steels but this cutter r217.69-01.50-16RE-12-5AN and insert XOMX 120408TR-M12 mp3000 takes it like a beast on dynamic paths. at the above parameters on the width of cut but the depth i've had up to .36, after that the machine cant take the vibration and we start getting random failures, also having a good supply of thru spindle air is key, even using about 600psi thru spindle coolant drastically reduced tool life and reliability. next time we run another job we use this cutter on ill get more video/data to share.

so this is one of the many parts we make out of 4340 or 4140 steel, this part is from 2" 4140 annealed plate and it was also flame cut to a 8" x 10" dim the cool part is that im removing 7.56cu in\min the machine is a 2011 doosan dhp 4000 i'm securing that part with a .100x60deg dovetail the cutter is a seco 1 1/2 dia super turbo 5flute with a m16 combimaster head and a combimaster holder adapter the weldon version works equally as well the inserts are the m12 edge .03 corner and mp3000 grade using thru tool air ap .32 ae.375 sfm 1000 ipt .005 , the insert edge life is about 45min usually we can easily get double that, but with that flame cut its just wearing them out quicker

i agree with foghorn, you have to create and use a point geometry to have reliable wcs association, using the other methods such as solid face, wire frame, etc will not always maintain the wcs location if you move it i create two lines then create a point at the intersection, use the wcs by geometry to set the axis, and go back and pick the point created as the associative geometry using the hotkey "p" so it will only pick the point and not autocursor an endpoint of the line

+1 on customization of the op manager toolbar, i would definitely like to add some extra separators between those buttons and it would be real cool to select regen between the current group, machine group or the whole deal with different icons it usually bites me when im rushing to get something out to the machine, and it definitely sucks when editing long regen paths what ive started doing is lock the other groups so they cannot regen that way your not waiting, you just get a message that says they're locked and wont regen