How do I list all work offset?

[PcRobotic]

Hi every one,

I'm trying to list all of my work offsets which may look like this one belows here. I would like to list them all so the setup-man will have short-time to look for all of the work offset i have. Oh,I also want to list all of my LOC for each tool att the tool table but I got conflict. Can you guys help me with this?

 

(*********** Tool List Info ***********)

(T241 - 3/4 FLAT ENDMILL - LOC = XXX Value")

(T237 - 3/8 FLAT ENDMILL - LOC = XXX Value")

 

(********** Work Offset List **********)

G90 G10 L2 P1 X0 Y0 Z0 (B0 - Top)

G90 G10 L P X0 Y0 Z0 (B180 - Bottom)

 

T241 ( 3/4 FLAT ENDMILL)

M6

N241 G0 G80 G90 S713 M03 T237

M08 ( OPERATION COMMENT 1 HERE )

M11 G0 G90 G54 B0.

M10 X.75 Y1.875

M56 H1 D9

G43 H1 Z2. D9

Z.2

G01 Z-.5 F6.42

Y1.125

G03 X1.5 Y.375 I.75 J0.

G01 X3.

G02 X3.375 Y0. I0. J-.375

G01 Y-2.

G02 X3. Y-2.375 I-.375 J0.

G01 X0.

G02 X-.375 Y-2. I0. J.375

G01 Y0.

G02 X0. Y.375 I.375 J0.

G01 X1.5

G03 X2.25 Y1.125 I0. J.75

G01 Y1.875

Z-.3

G0 Z2.

G0 G80 M9

G91 G28 Z0. M05

G90 G49

M01

T237 ( 3/8 FLAT ENDMILL)

M6

 

N237 G0 G40 G80 S1426 M03 T241

M08 ( OPERATION COMMENT 1 HERE )

M11 G0 G90 G54.1 P3 B-90.

M10 X.125 Y.9375

M56 H1 D9

G43 H1 Z2. D9

(OPERATION COMMENT 2 HERE)

Z.2

G01 Z-1. F6.33

Y.5625

G03 X.5 Y.1875 I.375 J0.

G01 X1.

G02 X1.1875 Y0. I0. J-.1875

G01 Y-2.

G02 X1. Y-2.1875 I-.1875 J0.

G01 X0.

G02 X-.1875 Y-2. I0. J.1875

G01 Y0.

G02 X0. Y.1875 I.1875 J0.

G01 X.5

G03 X.875 Y.5625 I0. J.375

G01 Y.9375

Z-.8

G0 Z2.

G0 G80 G90

G91 G28 Z0 M5

G30 X0 Y0 M09

M11 G90 G49 B0.

M01

M30

%

[crazy^millman]

Here from my good friend Robert: G10 Wofkoffset stuff

 

Welcome to the forum.

[crazy^millman]

For the L.O.C stuff I would look to MpMaster and use what ti has to help you build a process.

 

Welcome to the Forum.