How do I make Tool List automatic appear LOC?

[PcRobotic]

Hi,

I'm trying to make a tool list which may look like this:

 

 

(T1 =4" FACE MILL - H1 - D1 - LOC = 0)

(T2 = 3/4 FLAT ENDMILL - H2 - D1 - LOC = -.357)

(T3 = 3/4 DRILL - H3 - D1 - LOC = -1.52)

(T4 = 3/8 FLAT ENDMILL - H4 - D1 - LOC = -.785)

(T5 = 1/4 SPOTDRILL - H5/H52 - D1 - LOC = -.125/-.1)

(T6 = NO. 7 DRILL - H6 - D1 - LOC = -.5)

(T7 = 1/4-20 TAPRH - H7 - D1 - LOC = -.375)

 

 

This is my ptooltable looks like, please help. Thanks a bunch.

 

ptooltable # Write tool table, scans entire file, null tools are negative

tnote = t$

toffnote = tloffno$

tlngnote = tlngno$

spaces$=0

if t$ >= zero,

[

########## (T5 - 3/8 FLAT ENDMILL - R0.0500") ##########

if tcr$>0, scomm_str, *t$, " =", plistcomm, pdiamspc, " - ", *tcr$, punit, scomm_end, e$

if tcr$=0, scomm_str, *t$, " =", plistcomm, pdiamspc, scomm_end, e$

########## (T5 - 3/8 FLAT ENDMILL - R0.0500") ##########

]

#if t$ >= zero,

# [

# if tcr$>0, scomm_str, *t$, ptspace, " - ", plistcomm, " - ", *tlngno$, phspace, " - ", *tloffno$, pdspace, " - ", *tldia$, punit, pdiamspc, " - ", *tcr$, punit, " - ", popnote, scomm_end, e$

# if tcr$=0, scomm_str, *t$, ptspace, " - ", plistcomm, " - ", *tlngno$, phspace, " - ", *tloffno$, pdspace, " - ", *tldia$, punit, pdiamspc, " - ", " - ", popnote, scomm_end, e$

# ]

#if $t >= zero,

# [

# scomm_str, *t$, ptspace, " - ", plistcomm, scomm_end, e$

# ]

#if t$ >= zero,

# [

# if tcr$>0, scomm_str, *tnote, " ", *toffnote, " ", *tlngnote, " ", *tldia$, " ", *tcr, punit, " ", popnote, scomm_end, e$

# if tcr$=0, scomm_str, *tnote, " ", *toffnote, " ", *tlngnote, " ", *tldia$, " ", popnote, scomm_end, e$

# ]

spaces$=sav_spc

[Guest]

Still won't go to your reseller huh?

[PcRobotic]

My company bought a full package of Mastercam such as 2D and 3D and they are not buying the post services at all. That's why I have to bite my lips to be such as thick face for some judgement in this forum. That's why I need help some of the questions that I can integrated into the post. Thanks for your reply and I'm looking to get help for this one.

[Colin Gilchrist]

PcRobotic,

 

What is your company name and SIM Number? You can send it to me in a private message if you prefer.

[PcRobotic]

Hi, Collin

Are you an Admin of this website? If you are then I'll Pm to you but how can I PM to you? I'm prety new to this forum...

 

 

Best regards,

Steven.l

[K2csq7]

Hover your mouse over his name, a window will pop up and you will see an option to "send message".

[PcRobotic]

Thanks K2