mu2 upgrade changed post settings.

[Bill Cronkhite]

I'm not shure why vut when I upgraded to mu2 one of my posts was changed in the controll definition.

Not a big deal to fix, it was something I had to do when I wnt to X5 and updated posts, but it was kind

of a surprise when I took a file to the floor and it wouldn't run.

I ran this thru search before I posted and didn't get any returns, so I wondered if it was something I did.

[gcode]

what got changed?

[Bill Cronkhite]

Sorry, forgot to put that in there. Changed arc centers from absolute to incrimental on my cincy 850SX.

[Bill Cronkhite]

Just reread original post, my spelling and typing are horrible. Sorry.

[K2csq7]

This happened to me as well, and the settings have reverted back a couple times since. Keep an eye on them Bill.

[Cannon]

Same here. One machine definition changed my arc settings on ramp move and the other reverted back to default control definition. Both worked in MU1.

[Bill Cronkhite]

Thanks everyone. Just kinda wondered if I was seeing things. Happens when ya get older.....

[PLANET]

Glad to see that it isn't just me.....

 

Had mine all straightened out & then reloaded X6, screwed everything up all over again. It's easier to fix the second time around.