Waterline Toolpath

[KMartin]

Hi Everyone - Could I please get some help with this Waterline Toolpath .

I would like to use one toolpath to contour this part .How can I add cuts

so that I'm stepping down .006 on the Dark Green surface and .01 on the

Blue surfaces . I use to use surface contour and used 2 toolpaths .

Thanks for any help .I'm using X6 MU2 .

WATERLINE 1.MCX-6

[ajmer]

what you want to do is kinda opposite to teh way add cuts works in hst waterline

it is supposed to bigger z cuts on the steeper sections and less z cuts on the shallower sections

you want to go deeper z on the shallow sections and less z on the steeper sections

2 operations might be the best way to do what you want

[KMartin]

Thanks for the info ajmer . I usually create a surface

and use flowline .... if possible .