mass editing peck drill???

[buck30]

While I have used Pro Drill in the past I am not really one with it.

I am drilling a heap of holes on the 4th axis along a taper. So every drill has a different "Top of Stock" and hence a different

value in the code for a depth even though all depths are the same from the top of part.

I am trying to mass edit the peck values Pro drill is giving me. Can I do this??

Like change the amount of peck value so it changes all the vanues for every hole and thus every operation.

There are over 1000 holes and Pro Drill is giving me 107 operations. to many to edit singelary.

 

so any ideas out there??? Edit common parameters does not work as far at I can see.

Neither does editing the tool and checking the "update all the tools" box eather.

Soooooo......??????

[CJep]

Maybe do a mass edit, changing the Q value in the posted code?

[Oppiz]

Can you project the all of the holes to the same depth, then select them?

[buck30]

1. thanks Cjep this is how I handled it though it is not very M.Cish. Somewhat of a work around, wish there was more I could do in Edit common parameters area.
   

Thanks again guys.

[mcpgmr]

What is Pro Drill? We are still using X5.

[Mick]

http://www.moldplus.com/prodrill.htm