Movie from simulation

[depasquale]

I recently programmed a part , and ran the verification. The question I have is: I would like to send a copy of the simulation to a freind so he can see how the part will be cut. He does not have Mastercam or access to it. Is there a way I can set up the simulation so he can view it using Windows media player or realtime player, ect. It is just so he can get some idea of how his part will be cut.

[Guest]

Have you tried the "Create Presentation" button?

 

That will get it done for you

[Thoob]

I didn't know you could do that. Where is this "button" located?

[happycat64]

it on the top menu bar in sim verify it look like a film button

[Colin Gilchrist]

Creating the presentation can only be done if you are using Machine Simulation. Normal 'Verify' does not have the ability to record the verification. Make sure you are setting up and running the presentation in Machine Simulation, and then you will have the ability to use the 'Create Presentation' button...

[Chris Rizzo]

Or download a camtasia product, like jing

[TK-32™]

up until today i was recording the screen with my phone.

[Tom Matuszak from McCann Technical]

Here at school, seniors do presentations on parts that were programmed and cut. We use Windows Media Encoder to show the verification. Has always worked great. There is some good editing stuff as well.

http://www.microsoft...s.aspx?id=17792