Stock setup page issue

[Oppiz]

Since my new pc, my stock setup page is messed up. My X,Y,Z input fields aren't in the correct place.

[Scott Lundin Shopware Inc.]

Got a screen shot for us?

[Oppiz]

Big brother will not allow me to upload screen shots.

[SledGeek]

Big brother will not allow me to upload screen shots.

 

email screenshot to me and I will provide a screen shot

[JoshC]

If you are just referring to the autocurser tool bar then you can reload the default toolbar file by going to: settings --> Customize --> click open (in lower left) --> select the mastercam.mtb. This should load mastercams default toolbars. Hope this helps, if thats not what your after then hopefully you can get the screen shot on here.

[SledGeek]

Here ya go....

stock origin.doc

[SledGeek]

or this

[CJep]

Oppiz, what's your screen resolution?

In your desktop display do you have the magnifier set higher than 125%?

[Oppiz]

Oppiz, what's your screen resolution?

In your desktop display do you have the magnifier set higher than 125%?

 

That was it! thanks. Now you all know I'm an old geezer with bad vision.