Where I can buy this switch for CQ6230 lathe

[CNC-ERIC]

HI, there,

 

Our CQ6230 lathe switch broken last week, I have no source to get it so far, there is no manufacture information on it, and none of my colleagues know where the machine came from, I phoned several loca dealers, sent pictures to them, no luck.

 

the attachment are the switch and the lathe looks like.

 

Can anyone please tell where I can get the switch to make the lathe alive.

 

thank you very much.

 

Eric

[Dimensional Machine]

Looks like the guts for an e-stop switch.

Go to any industrial electric store.

They are not machine specific, and are an off the shelf item.

[CNC-ERIC]

Hi, Dimensional Machine,

 

that switch is connect to the rod(lift up/down) to control spindle clockwise or countclockwise.

 

thanks

 

Eric

[Pilot Plant Supervisor]

Try Grainger, I found replacement switches for our Haas machines there. Most machine tool builders use standard industrial switches.

[Guyinthedesert]

Check out Newark Electronics, Mouser, or Digi-key

[ERIC14779]

look under reversing switches