Okuma IGF for PC

[mig]

OKUMA IGF for PC - is it True existing application ?

[YoDoug®]

Yes I use it all the time.

[Mr. M]

Wrote a program on it earlier today. I use it for all my Okuma lathe programming. It outputs all the canned turning cycles so edits at the control are a breeze. What machine are you wanting to program with it?

[mig]

okuma

name='Mr. M' timestamp='1387384426' post='895520']

Wrote a program on it earlier today. I use it for all my Okuma lathe programming. It outputs all the canned turning cycles so edits at the control are a breeze. What machine are you wanting to program with it?[/b]

multus

[mig]

Yes I use it all the time.

Doug,

Do you want to say it is possible to install this app on PC ?

[YoDoug®]

Doug,

Do you want to say it is possible to install this app on PC ?

 

Yes there is a PC version available. That is what is showing in the picture I attached above. It requires a separate license from Okuma than the AOT IGF that runs on the machine. You can go back and forth between PC and machine control with IGF files if you have both licensed.

[mkd]

does it work on older 7000 controls?

[Mr. M]

There is IGF for on the 7000 controls and you can use the PC version to program them as well.