How to use a two-dimensional tool path dig this groove? ?

[gaohongbin]

[Jayson Kramer]

Are you asking how to change this from Rastor to Vector and engrave this it something?

[Thad]

Jay, I believe that's a "broken link" image. Something like you'd see when you've exceeded your bandwidth at a free image hosting site (or similar). Possibly even a site that's blocked in the US.

[Thad]

Here's all I can pull out of it.

[Thad]

Interesting. Now the picture shows up.

[gaohongbin]

Terrible, I work overtime

 

[Thad]

How about a 2D pocket with tapered walls? Set the taper angle in the depth cuts page. Maybe finish with a tapered wall contour?

[gaohongbin]

I'm sorry, I can not handle

[gaohongbin]

Do you think that there is no difficulty? ?

[Thad]

I think you should either try a different image hosting site or attach the image directly to your post. Most of your images don't show up consistently so we can't tell what you're trying to accomplish.

[gaohongbin]

You can now see the

[Thad]

I can only see two of three images right now. Earlier none of them showed up. Later, some of them did. Still, not all of the show up. Try attaching the image by clicking the "More Reply Options" button. You'll see an option to attach files below the text box.

[BCHEN]

i wonder if you have a mastercam. if not you can download a demo one and practice. i am chinese too, and i am living in canada. if you need help just sent me an email, and will glad to help you. when you get any question, use help on mastercam first. that very usefull. and this forum is great place with alot excellent experience guys who might help you out at anytime. enjoy