M98 P1

[connormac]

I need to put M98 and the sub program # on the same line. Is this possible.

 

this is what my post says

 

psbcall # write out sub calls

n,pwcsf,e

if mach=1,["G22 ",*subln,e]

else,[if mach=4,["CALL ",*subno,e]

else,[n,"M98 ",*subpn,e]]

reps=reps-1

wkcs=wkcs+1

wkcso=wkcso+1

if wkcso>20&mach=4,[result=mprint(string4),e

exitpost]

 

Do I just take out the comma ???

 

[ 10-16-2003, 10:57 PM: Message edited by: connormac ]

[crazy^millman]

It should do it have you tried taking out the comma. Here is what my program post out.

code:

---

M98P9002L1

M1

(TOOL PLANE 1)

M61(UNLOCK)

G0X.999Y-.55Z3.25A45.

M60(LOCK)

M98P9002L1

M1

(TOOL PLANE 1)

M61(UNLOCK)

G0X.999Y-.55Z3.25A90.

M60(LOCK)

M98P9002L1

M1

(TOOL PLANE 1)

M61(UNLOCK)

G0X.999Y-.55Z3.25A135.

M60(LOCK)

M98P9002L1

M1

(TOOL PLANE 1)

M61(UNLOCK)

G0X.999Y-.55Z3.25A180.

M60(LOCK)

M98P9002L1

M1

---

Here is the way it looks in the post:

code:

---

 psub_call_s     #Call to sub level

result = nwadrs(strp, sub_prg_no)

sub_prg_no = sub_prg_no + sav_progno + 1000 #Add sub number offset

if sav_progno = sub_prg_no, result = mprint(sprgnerror)

pbld, n, "M98", *sub_prg_no, "L1", e

---

I hope that helps.

 

Crazy Millman

[Jimmy Wakeford from Barefoot CNC]

Change code from:

if mach=1,["G22 ",*subln,e]

else,[if mach=4,["CALL ",*subno,e]

else,[n,"M98 ",*subpn,e]]

 

to:

 

if mach=1,"G22 ",*subln,e

if mach=4,"CALL ",*subno,e

if mach <> 1 & mach <> 4,n,"M98 ",*subpn,e

 

Jimmy

[connormac]

thanks I will try that at work in the AM.