inch to millimeter

[Readme]

How to change inch to millimeter?

 

Settings > Configuration > Current: but here is only inch and Metric.

[CJep]

Is the file currently drawn in the inch system?

You could change the config from inch to metric and it will ask if you would like to scale the current part.

If it is not scaled then you could use X-Form scale and multiply by 25.4.

If you have a drawing with inch dims but would like to draw it in metric you could input your values in the calculable as the inch value followed by "in" and it will be converted for you.

[Readme]

I have blank page. Well, I do not choose MM? Only must inch > multiply by 25.4.

[CJep]

If you want to draw in the inch system use the inch config, if you need metric use the metric config.

[Readme]

Why Mastercam not use G71 or how I can? Its come Big code...

[Jayson Kramer]

Readme are you talking about drawing or the code for the machine?

[Readme]

I make demo and want use G71.

DEMO.MCX-7

[crazy^millman]

Readme the roughing cycles in lathe are not canned cycles. To get Canned Cycles from Mastercam you need to use them. Using a Rough Cycle is Long hand by design.

 

Toolpaths/Canned/

-Rough

-Finish

-Grooved

-Repeat Pattern

 

Suggest you get a hold of your local Mastercam Dealer and have them help you get some training. Or buy some online training or some books.

[Readme]

Thanks.

 

 

Error: make simulation

Allocation of a new chunk of memory (MB) has failed. Please free up memory or increase you swap memory space.

 

I have Win732MB

 

How to solve it?