dogleg rapids move in drilling

[kool]

Just came across issue with dogleg rapids move for drilling cycles in X7 verify.

 

It looks to me when you are drilling multiple holes in one drilling operation, X7 verify does not show dogleg moves between those holes.

 

I see that in drilling only.

 

Is that a true for others, Please confirm!

[gcode]

do you have rapid definitions set properly in the Rapids page of the Control Def

 

http://www.emastercam.com/board/index.php?showtopic=75105

[kool]

do you have rapid definitions set properly in the Rapids page of the Control Def

 

http://www.emasterca...showtopic=75105

 

My rapid setting in control definition seems to be right(dog leg rapid). Master cam simulate that as it should be for milling tool paths only, but in drilling tool path it moves in straight line from one point to another. if my setting were wrong then it would do that for all tool paths type.

 

I don't know what I m missing.