mastercam wireframe question

[Chrisselfstarter]

i was curious if there is a way to have a part in wireframe in ISO view with just the foreground visible without the background wireframe , without going through and deleting the background wireframe , would be handy in setup sheets for accuracy 

 

 

any imfo would be great thanks 

[jeff]

No

[Brando]

hey man do you mean like this?, its in the shading toolbar

 

after i posted this i thought you might be talking about having wireframe geometry display like that and the answer is i dont think so

[DODGERFAN]

^{You can make entities disappear.  Highlight the entities that you want and hold down ALT and "e".   everything other that what you highlighted will vanish,   you can bring it all back by retyping  ALT E.     Hope this helps.}

[Jayson Kramer]

To do as Brando showed the only way to toggle to this is by using a solid.

[Chrisselfstarter]

yes that is exactly what im talking about and how do you do that with a solid ? 

 

thanks guys this forum is great you guys are alot of help

[Brando]

Chris heres what you gotta do, right click in the blank toolbar space,  the areas that you can do this are the light blue color on my screen,  it will not open that window up if you are not in a blank toolbar space area, after you do,  click on shading, then this  will pop up somewhere on the screen,  the 3 circled are the ones that control the look of the wireframe display on solids

 

and fyi, you could also drag that shading toolbar into a blank space area and you can also save it so you always have it there if you wish

 

hth br