Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

X8 WCS problems

Sticky

By Sticky,
in Industrial Forum

 Share

Recommended Posts

Sticky Newbie

Sticky

Posted
Posted

I'm starting to have some fun with X8, it is ignoring my wcs selections and choosing its own :laughing: :laughing:

 

I have 4 wcs' on this side of the tombstone, one for each hole. The custom WCS's are named as follows, 5410, 5411, 5412 and 5413.

 

5410:

post-40824-0-06070500-1419636645_thumb.jpg

 

5411:

post-40824-0-06379000-1419636655_thumb.jpg

 

5412:

post-40824-0-24149900-1419636665_thumb.jpg

 

5413:

post-40824-0-36364900-1419636682_thumb.jpg

 

I have my toolpaths' wcs set in the order I would like the work performed:

post-40824-0-44501800-1419636872_thumb.jpg

 

5410:

post-40824-0-54095400-1419637210_thumb.jpg

 

5411:

post-40824-0-69872800-1419637235_thumb.jpg

 

5412:

post-40824-0-37651400-1419637255_thumb.jpg

 

5413:

post-40824-0-08584000-1419637283_thumb.jpg

 

And now the posted code:

post-40824-0-31542900-1419637404_thumb.jpg

 

If you look at N55, it calls the first offset correctly.

The next offset call is N100, it calls an offset that is being used on the other side of the tombstone, not 5411 like it should be.

The next offset call should be on N145, but it just decides to not bother calling any offset at all here, too much work I guess... It should be calling 5412

The final offset is called on N190 and is correct.

 

I know X8 had some wcs bugs early on but I thought they had been resolved by now? I'm on the third release.

 

 

 

Link to comment
Share on other sites
Sticky Newbie

Sticky

Posted
  • Author
Posted 




1050



17 60 26 12 2014 17 5 3 E:xxxxx\TEST FIXTURE\P12 TEST FIXTURE.MCX-8



20600



11491 1162B3E5-B797-11DB-9DF8-001422F4251F "" "" Machine Base



20600



11492 1162B3E7-B797-11DB-9DF8-001422F4251F "X" "X" HMC X Axis



20600



11493 1162B3E9-B797-11DB-9DF8-001422F4251F "B" "B" HMC B Axis



20600



11494 1162B3EB-B797-11DB-9DF8-001422F4251F "" "" Machine Table



20600



36132 70552F70-7653-11E4-997C-3085A9A63D99 "" "" Stock



20600



11495 1162B3ED-B797-11DB-9DF8-001422F4251F "Z" "Z" HMC Z Axis



20600



11496 1162B3EF-B797-11DB-9DF8-001422F4251F "Y" "Y" HMC Y Axis



20600



11497 1162B3F1-B797-11DB-9DF8-001422F4251F "" "" Tool Spindle



20600



11498 1162B3F3-B797-11DB-9DF8-001422F4251F "" "" Automatic Tool Changer



20601



11507 1162B401-B797-11DB-9DF8-001422F4251F 0 Default



999



2 0 140



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Drill counterbore with endmill



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.11811 0. 0 19 1.45994871 18.84699843 5.86937189 3 C:\users\public\documents\shared mcamx8\mill\Tools\flatmill.mcx-8



1014



0.99939083 -0.0348995 -0. 0. -0. 1. -0.0348995 -0.99939083 0.



1016



140 10 2 19 1.45994871 18.84699843 5.86937189 0 5410 0 4 0 0. 0 0 26 140 0.



1017



0.99939083 -0.0348995 -0. 0. -0. 1. -0.0348995 -0.99939083 0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5410



20011


 



20012



5410



20013


 



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20001



3mm endmill



20002


 



20003


 



20004



42 10 1 0 0.11811 0. 0. 180. 42 42 25.9 25.9 180. 12937 8 4 0. 0. 0. 0. 0. 0. 0. 0.



20006



0 50. 50. 25. 25. 0. 0. 0.



20007



0. 0.25 1. 0.5 0.11811 2. 1. 0 100. 12. 0 1. 1.



20008



0. 0. 1. 0 0. 0. 0 0. 0.



20009



0 0



20800



0.



1001



1 5 5 42 42 42 0 12937 25.9 0 -0. 0. 2. 8.18496459 -8.84699843 -16.21227512 0 0.



0



0 -0. 0. 2. -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



0 -0. 0. -0.1 0.1 25.9 0.1 0.1 0.1 0.1 2.1 0.2 0.1 0.1 -0. 0. 2. 3000 0 0.



80


 



999



2 0 141



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Drill counterbore with endmill



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.11811 0. 0 21 -0.53885997 18.84699717 5.93917219 3 C:\users\public\documents\shared mcamx8\mill\Tools\flatmill.mcx-8



1014



0.99939075 -0.03490173 -0.00000214 0.00000214 -0.00000007 1. -0.03490173 -0.99939075 -0.



1016



141 10 2 21 -0.53885997 18.84699717 5.93917219 0 5411 0 4 0 0. 0 0 26 141 0.



1017



0.99939075 -0.03490173 -0.00000214 0.00000214 -0.00000007 1. -0.03490173 -0.99939075 -0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5411



20011


 



20012



5411



20013


 



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20800



0.



1000



1 5 5 42 42 42 0 12937 25.9 0 -0.00000022 0.00000011 2. 10.18372878 -8.84697654 -16.28209699 0 0.



0



0 -0.00000022 0.00000011 2. -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



0 -0.00000022 0.00000011 -0.1 0.1 25.9 0.1 0.1 0.1 0.1 2.10000011 0.20000011 0.10000011 0.1 -0.00000022 0.00000011 2. 3000 0 0.



80


 



999



2 0 142



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Drill counterbore with endmill



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.11811 0. 0 22 0.44570129 17.03597314 5.95257304 3 C:\users\public\documents\shared mcamx8\mill\Tools\flatmill.mcx-8



1014



0.99862945 0.0523375 0.00000305 -0.00000305 -0.00000016 1. 0.0523375 -0.99862945 0.



1016



142 10 2 22 0.44570129 17.03597314 5.95257304 0 5412 0 4 0 0. 0 0 26 142 0.



1017



0.99862945 0.0523375 0.00000305 -0.00000305 -0.00000016 1. 0.0523375 -0.99862945 0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5412



20011


 



20012



5412



20013


 



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20800



0.



1000



1 5 5 42 42 42 0 12937 25.9 0 0.00000013 0.0000003 2. 10.06399874 -7.03600524 -15.41549263 0 0.



0



0 0.00000013 0.0000003 2. -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



0 0.00000013 0.0000003 -0.1 0.1 25.9 0.1 0.1 0.1 0.1 2.09999987 0.19999987 0.09999987 0.1 0.00000013 0.0000003 2. 3000 0 0.



80


 



999



2 0 143



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Drill counterbore with endmill



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.11811 0. 0 23 -1.55164926 17.03596991 5.84790152 3 C:\users\public\documents\shared mcamx8\mill\Tools\flatmill.mcx-8



1014



0.99862957 0.05233537 -0.00000305 0.00000305 0.00000016 1. 0.05233537 -0.99862957 0.



1016



143 10 2 23 -1.55164926 17.03596991 5.84790152 0 5413 0 4 0 0. 0 0 26 143 0.



1017



0.99862957 0.05233537 -0.00000305 0.00000305 0.00000016 1. 0.05233537 -0.99862957 0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5413



20011


 



20012



5413



20013


 



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20800



0.



1000



1 5 5 42 42 42 0 12937 25.9 0 -0.00000006 0.00000015 2. 12.06126809 -7.03593782 -15.31084345 0 0.



0



0 -0.00000006 0.00000015 2. -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



0 -0.00000006 0.00000015 -0.1 0.1 25.9 0.1 0.1 0.1 0.1 2.10000003 0.20000003 0.10000003 0.1 -0.00000006 0.00000015 2. 3000 0 0.



80


 



999



2 0 144



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Drill hole for reamer.



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.096 0. 0 19 1.45994871 18.84699843 5.86937189 3 C:\users\public\documents\shared mcamx8\mill\Tools\drill.mcx-8



1014



0.99939083 -0.0348995 -0. 0. -0. 1. -0.0348995 -0.99939083 0.



1016



144 3 2 19 1.45994871 18.84699843 5.86937189 0 5410 0 2 0 0. 0 0 27 144 0.



1017



0.99939083 -0.0348995 -0. 0. -0. 1. -0.0348995 -0.99939083 0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5410



20011


 



20012



5410



20013


 



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20001



NO. 41 DRILL



20002


 



20003


 



20004



44 3 1 0 0.096 0. 0. 135. 44 44 11.9 11.9 180. 11937 8 2 0. 0. 0. 0. 0. 0. 0. 0.



20005



1 30. 0. 15. 15. 0. 118. 0. 0.



20007



0. 1.125 2. 1.5 0.096 2. 1. 0 100. 9. 0 2. 1.



20008



0. 0. 1. 0 0. 0. 0 0. 0.



20009



0 0



20800



0.



1002



1 5 5 44 44 44 0 11937 11.9 0 -0. 0. 2. 8.18496459 -8.84699843 -16.21227512 0 0.



0



0 -0. 0. 2. -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



1 -0. 0. -1.22 0.1 11.9 0.04 0.04 0.04 0.1 2.1 0.11 0.1 0.1 -0. 0. 2. 3000 0 0.



80


 



999



2 0 145



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Drill hole for reamer.



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.096 0. 0 21 -0.53885997 18.84699717 5.93917219 3 C:\users\public\documents\shared mcamx8\mill\Tools\drill.mcx-8



1014



0.99939075 -0.03490173 -0.00000214 0.00000214 -0.00000007 1. -0.03490173 -0.99939075 -0.



1016



145 3 2 21 -0.53885997 18.84699717 5.93917219 0 5411 0 2 0 0. 0 0 27 145 0.



1017



0.99939075 -0.03490173 -0.00000214 0.00000214 -0.00000007 1. -0.03490173 -0.99939075 -0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5411



20011


 



20012



5411



20013


 



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20800



0.



1000



1 5 5 44 44 44 0 11937 11.9 0 -0.00000022 0.00000011 2. 10.18372878 -8.84697654 -16.28209699 0 0.



0



0 -0.00000022 0.00000011 2. -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



1 -0.00000022 0.00000011 -1.22 0.1 11.9 0.04 0.04 0.04 0.1 2.10000011 0.11000011 0.10000011 0.1 -0.00000022 0.00000011 2. 3000 0 0.



80


 



999



2 0 146



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Drill hole for reamer.



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.096 0. 0 22 0.44570129 17.03597314 5.95257304 3 C:\users\public\documents\shared mcamx8\mill\Tools\drill.mcx-8



1014



0.99862945 0.0523375 0.00000305 -0.00000305 -0.00000016 1. 0.0523375 -0.99862945 0.



1016



146 3 2 22 0.44570129 17.03597314 5.95257304 0 5412 0 2 0 0. 0 0 27 146 0.



1017



0.99862945 0.0523375 0.00000305 -0.00000305 -0.00000016 1. 0.0523375 -0.99862945 0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5412



20011


 



20012



5412



20013


 



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20800



0.



1000



1 5 5 44 44 44 0 11937 11.9 0 0.00000013 0.0000003 2. 10.06399874 -7.03600524 -15.41549263 0 0.



0



0 0.00000013 0.0000003 2. -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



1 0.00000013 0.0000003 -1.22 0.1 11.9 0.04 0.04 0.04 0.1 2.09999987 0.10999987 0.09999987 0.1 0.00000013 0.0000003 2. 3000 0 0.



80


 



999



2 0 147



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Drill hole for reamer.



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.096 0. 0 23 -1.55164926 17.03596991 5.84790152 3 C:\users\public\documents\shared mcamx8\mill\Tools\drill.mcx-8



1014



0.99862957 0.05233537 -0.00000305 0.00000305 0.00000016 1. 0.05233537 -0.99862957 0.



1016



147 3 2 23 -1.55164926 17.03596991 5.84790152 0 5413 0 2 0 0. 0 0 27 147 0.



1017



0.99862957 0.05233537 -0.00000305 0.00000305 0.00000016 1. 0.05233537 -0.99862957 0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5413



20011


 



20012



5413



20013


 



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20800



0.



1000



1 5 5 44 44 44 0 11937 11.9 0 -0.00000006 0.00000015 2. 12.06126809 -7.03593782 -15.31084345 0 0.



0



0 -0.00000006 0.00000015 2. -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



1 -0.00000006 0.00000015 -1.22 0.1 11.9 0.04 0.04 0.04 0.1 2.10000003 0.11000003 0.10000003 0.1 -0.00000006 0.00000015 2. 3000 0 0.



80


 



999



2 0 148



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Ream holes.



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.098425 0. 0 19 1.45994871 18.84699843 5.86937189 3 C:\users\public\documents\shared mcamx8\mill\Tools\reamer.mcx-8



1014



0.99939083 -0.0348995 -0. 0. -0. 1. -0.0348995 -0.99939083 0.



1016



148 6 2 19 1.45994871 18.84699843 5.86937189 0 5410 0 4 0 0. -1 0 28 148 0.



1017



0.99939083 -0.0348995 -0. 0. -0. 1. -0.0348995 -0.99939083 0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5410



20011


 



20012



5410



20013


 



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20001



2.5mm reamer



20002


 



20003


 



20004



45 6 1 0 0.098425 0. 0. 180. 45 45 23.4 23.4 180. 7795 8 4 0. 0. 0.04 0. 0. 0. 0. 0.



20005



4 0. 0. 20. 10. 0. 180. 0. 0.



20007



0.03125 0.7 3. 0.7 0.098425 2. 1. 0 100. 12. 0 3. 1.



20008



0. 0. 1. 0 0. 0. 0 0. 0.



20009



256 0



20800



0.



1002



1 5 5 45 45 45 0 7795 23.4 0 -0. 0. 2. 8.18496459 -8.84699843 -16.21227512 0 0.



0



0 -0. 0. 2. -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



1 -0. 0. -1. 0.1 23.4 0.2 0.2 0.2 0.1 2.1 0.11 0.1 0.1 -0. 0. 2. 3000 0 0.



80


 



999



2 0 149



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Ream holes.



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.098425 0. 0 21 -0.53885997 18.84699717 5.93917219 3 C:\users\public\documents\shared mcamx8\mill\Tools\reamer.mcx-8



1014



0.99939075 -0.03490173 -0.00000214 0.00000214 -0.00000007 1. -0.03490173 -0.99939075 -0.



1016



149 6 2 21 -0.53885997 18.84699717 5.93917219 0 5411 0 4 0 0. -1 0 28 149 0.



1017



0.99939075 -0.03490173 -0.00000214 0.00000214 -0.00000007 1. -0.03490173 -0.99939075 -0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5411



20011


 



20012



5411



20013


 



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20800



0.



1000



1 5 5 45 45 45 0 7795 23.4 0 -0.00000022 0.00000011 2. 10.18372878 -8.84697654 -16.28209699 0 0.



0



0 -0.00000022 0.00000011 2. -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



1 -0.00000022 0.00000011 -1. 0.1 23.4 0.2 0.2 0.2 0.1 2.10000011 0.11000011 0.10000011 0.1 -0.00000022 0.00000011 2. 3000 0 0.



80


 



999



2 0 150



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Ream holes.



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.098425 0. 0 22 0.44570129 17.03597314 5.95257304 3 C:\users\public\documents\shared mcamx8\mill\Tools\reamer.mcx-8



1014



0.99862945 0.0523375 0.00000305 -0.00000305 -0.00000016 1. 0.0523375 -0.99862945 0.



1016



150 6 2 22 0.44570129 17.03597314 5.95257304 0 5412 0 4 0 0. -1 0 28 150 0.



1017



0.99862945 0.0523375 0.00000305 -0.00000305 -0.00000016 1. 0.0523375 -0.99862945 0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5412



20011


 



20012



5412



20013


 



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20800



0.



1000



1 5 5 45 45 45 0 7795 23.4 0 0.00000013 0.0000003 2. 10.06399874 -7.03600524 -15.41549263 0 0.



0



0 0.00000013 0.0000003 2. -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



1 0.00000013 0.0000003 -1. 0.1 23.4 0.2 0.2 0.2 0.1 2.09999987 0.10999987 0.09999987 0.1 0.00000013 0.0000003 2. 3000 0 0.



80


 



999



2 0 151



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Ream holes.



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.098425 0. 0 23 -1.55164926 17.03596991 5.84790152 3 C:\users\public\documents\shared mcamx8\mill\Tools\reamer.mcx-8



1014



0.99862957 0.05233537 -0.00000305 0.00000305 0.00000016 1. 0.05233537 -0.99862957 0.



1016



151 6 2 23 -1.55164926 17.03596991 5.84790152 0 5413 0 4 0 0. -1 0 28 151 0.



1017



0.99862957 0.05233537 -0.00000305 0.00000305 0.00000016 1. 0.05233537 -0.99862957 0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5413



20011


 



20012



5413



20013


 



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20800



0.



1000



1 5 5 45 45 45 0 7795 23.4 0 -0.00000006 0.00000015 2. 12.06126809 -7.03593782 -15.31084345 0 0.



0



0 -0.00000006 0.00000015 2. -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



1 -0.00000006 0.00000015 -1. 0.1 23.4 0.2 0.2 0.2 0.1 2.10000003 0.11000003 0.10000003 0.1 -0.00000006 0.00000015 2. 3000 0 0.



80


 



999



2 0 152



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Spot bores.



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.375 0. 0 5 4.8 13.4944 2. 3 C:\users\public\documents\shared mcamx8\MILL\TOOLS\SPOTDRIL.mcx-8



1014



0. 1. -0. -0. 0. 1. 1. -0. 0.



1016



152 2 2 5 4.8 13.4944 2. 0 5619 0 2 0 0. 0 0 12 152 0.



1017



0. 1. -0. -0. 0. 1. 1. -0. 0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5619



20011



Barrel hole offset and softjaw offset



20012



5619



20013



Barrel hole offset and softjaw offset



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20001



 3/8 SPOTDRILL



20002


 



20003


 



20004



8 2 1 0 0.375 0. 0. 120. 8 8 20. 150. 150. 5000 8 2 0. 0. 0. 0. 0. 0. 0. 0.



20005



0 0. 0. 0. 0. 0. 0. 0. 0.



20007



0. 2. 3. 2.5 0.375 2. 1. 0 0. 0. 0 3. 1.



20008



0. 0. 1. 0 0. 0. 0 0. 0.



20009



0 0



20800



0.



1002



1 5 5 8 8 8 0 5000 20. 0 0. 1.64 2. 5.2 -3.4944 8. 0 0.



0



0 0. 1.64 2. -2. 0



0



0 0. 1.64 0.01 -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



0 0. 1.64 -0.04 0.1 20. 0.25 0.25 0.25 0.1 0.01 0.01 0. 0.1 0. 1.64 0.01 3000 0 0.



100



0 -0. -1.64 -0.04 0.01 0.01 0.1 20. -0. -1.64 0.01 300 0 0. 0. 1. -0. -0. 0. 1. 1. -0. 0. 0.



80


 



0



0 -0. -1.64 2. -2. 0



999



2 0 153



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Drill holes for reamer.



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.546875 0. 1 5 4.8 13.4944 2. 3 C:\users\public\documents\shared mcamx8\mill\Tools\drill.mcx-8



1014



0. 1. -0. -0. 0. 1. 1. -0. 0.



1016



153 3 2 5 4.8 13.4944 2. 0 5619 0 2 0 0. 0 1 29 153 0.



1017



0. 1. -0. -0. 0. 1. 1. -0. 0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5619



20011



Barrel hole offset and softjaw offset



20012



5619



20013



Barrel hole offset and softjaw offset



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20001



35/64 DRILL



20002


 



20003


 



20004



59 3 1 0 0.546875 0. 0. 118. 59 59 16.7 16.7 180. 2083 8 2 0. 0. 0. 0. 0. 0. 0. 0.



20005



1 30. 0. 15. 15. 0. 118. 0. 0.



20007



0. 4.625 7. 4.625 0.546875 2. 1. 0 100. 54. 0 7. 1.



20008



0. 0. 1. 0 0. 0. 0 0. 0.



20009



0 0



20800



0.



1002



1 5 5 59 59 59 0 2083 8.332 0 0. 1.64 2. 5.2 -3.4944 8. 0 0.



0



0 0. 1.64 2. -2. 0



0



0 0. 1.64 0.01 -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



1 0. 1.64 -3.09858983 0.1 8.332 0.25 0.25 0.25 0.1 0.01 0.01 0. 0.1 0. 1.64 0.01 3000 0 0.



100



0 -0. -1.64 -3.09858983 0.01 0.01 0.1 8.332 -0. -1.64 0.01 300 0 0. 0. 1. -0. -0. 0. 1. 1. -0. 0. 0.



80


 



0



0 -0. -1.64 2. -2. 0



999



1 0 155



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Chamfer bores.



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



41 0.25 0. 1 5 4.8 13.4944 2. 2 C:\users\public\documents\shared mcamx8\MILL\TOOLS\CHMFMILL.mcx-8



1014



0. 1. -0. -0. 0. 1. 1. -0. 0.



1016



155 12 1 5 4.8 13.4944 2. 41 5619 0 4 0 0. 0 0 17 155 0.



1017



0. 1. -0. -0. 0. 1. 1. -0. 0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5619



20011



Barrel hole offset and softjaw offset



20012



5619



20013



Barrel hole offset and softjaw offset



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20001



 1/4 CHAMFER MILL



20002


 



20003


 



20004



6 12 1 0 0.25 0. 0. 45. 6 6 100. 100. 150. 10000 8 4 0. 0. 0. 0. 0. 0. 0. 0.



20006



0 50. 50. 25. 25. 0.0354 0. 0.



20007



0. 0.5 2.5 0.75 0.25 2. 1. 0 100. 25. 0 2.5 1.



20008



0. 0. 1. 0 0. 0. 0 0. 0.



20009



0 0



20800



0.



1002



1 5 5 6 6 6 0 5000 30. 0 -0.05346141 -1.64367724 2. 5.2 -3.4944 8. 0 0.



0



0 -0.05346141 -1.64367724 2. -2. 0



0



0 -0.05346141 -1.64367724 0.01 -2. 0



1



0 -0.05346141 -1.64367724 -0.0401 120. 0



1



41 -0.04971841 -1.65560368 -0.0401 30. 2000



3



0 0 0.23651609 -1.56577154 0.09339884 -1.61068761 -0.0401 -1. 0 0



3



0 0 0.23651609 -1.56577154 -0. -1.64 -0.0401 -1. 1000 1



3



0 0 0.22976441 -1.5469514 -0. -1.64 -0.0401 -1. 100 0



3



0 0 -0.04829912 -1.65955989 0.09073264 -1.60325564 -0.0401 -1. 0 0



1



140 -0.0436071 -1.67114587 -0.0401 -1. 200



1004


 



0



0 -0.0436071 -1.67114587 0.25 -2. 0



0



0 -0.05346141 1.63632276 0.25 -2. 0



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



41 0.25 0. 1 5 4.8 13.4944 2. 2 C:\users\public\documents\shared mcamx8\MILL\TOOLS\CHMFMILL.mcx-8



1014



0. 1. -0. -0. 0. 1. 1. -0. 0.



1016



155 12 1 5 4.8 13.4944 2. 41 5619 0 4 0 0. 0 0 17 155 0.



1017



0. 1. -0. -0. 0. 1. 1. -0. 0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5619



20011



Barrel hole offset and softjaw offset



20012



5619



20013



Barrel hole offset and softjaw offset



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20800



0.



1000



1 5 5 6 6 6 0 5000 30. 0 -0.05346141 1.63632276 0.01 5.2 -3.4944 8. 0 0.



0



0 -0.05346141 1.63632276 0.01 -2. 0



1



0 -0.05346141 1.63632276 -0.0401 120. 0



1



41 -0.04971841 1.62439632 -0.0401 30. 2000



3



0 0 0.23651609 1.71422846 0.09339884 1.66931239 -0.0401 -1. 0 0



3



0 0 0.23651609 1.71422846 0. 1.64 -0.0401 -1. 1000 1



3



0 0 0.22976441 1.7330486 0. 1.64 -0.0401 -1. 100 0



3



0 0 -0.04829912 1.62044011 0.09073264 1.67674436 -0.0401 -1. 0 0



1



140 -0.0436071 1.60885413 -0.0401 -1. 200



1004


 



0



0 -0.0436071 1.60885413 2. -2. 0



999



2 0 154



1051



Mpmaster Generic 3/4-Axis Horizontal



1053



Machine Group-1



1008



Reamer barrel holes.



1011



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



1012



0 0 0 0 0 0 0 0 0 0



1013



0 0.553 0. 0 5 4.8 13.4944 2. 3 C:\users\public\documents\shared mcamx8\mill\Tools\reamer.mcx-8



1014



0. 1. -0. -0. 0. 1. 1. -0. 0.



1016



154 6 2 5 4.8 13.4944 2. 0 5619 0 2 0 0. -1 0 30 154 0.



1017



0. 1. -0. -0. 0. 1. 1. -0. 0.



950



0 0 0 11507 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1025



4052 4054 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0



1027



1. 0. 0. 0. 1. 0. 0. 0. 1. 0. 0. 0.



1028



0 0 0. 0. 1. 0. 0. 1. 0 0 0 0



1029



0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0



1020



4. 13.155 11.6 0. 14.05690019 5.8000004 0 1. 0. 0. 0. 0 50000 ALUMINUM inch - 2024



20010



5619



20011



Barrel hole offset and softjaw offset



20012



5619



20013



Barrel hole offset and softjaw offset



20014



TOP



20015


 



20016



ALUMINUM inch - 2024



20017


 



20018



Parts



20019


 



20001



.553 reamer



20002


 



20003


 



20004



60 6 1 0 0.553 0. 0. 180. 60 60 15.2 15.2 180. 1381 8 2 0. 0. 0.06 0. 0. 0. 0. 0.



20005



4 0. 0. 20. 10. 0. 180. 0. 0.



20007



0.5625 2. 7.5 2.5 0.553 2. 1. 0 100. 62. 0 7.5 1.



20008



0. 0. 1. 0 0. 0. 0 0. 0.



20009



256 0



20800



0.



1002



1 5 5 60 60 60 0 1381 15.2 0 0. 1.64 2. 5.2 -3.4944 8. 0 0.



0



0 0. 1.64 2. -2. 0



0



0 0. 1.64 0.01 -2. 0



82



0. 0. 0. 0. 0. 0. 0. 0. 0. 0.



81



5 0. 1.64 -3. 0.1 15.2 0.5 0.5 0.5 0.1 0.01 0.01 0. 0.1 0. 1.64 0.01 3000 0 0.



100



0 -0. -1.64 -3. 0.01 0.01 0.1 15.2 -0. -1.64 0.01 300 0 0. 0. 1. -0. -0. 0. 1. 1. -0. 0. 0.



80


 



0



0 -0. -1.64 2. -2. 0



1003



5.2 -3.4944 8.


 







			
		


		
			

				
					
						

	
	
		

			
				
				

					
				

			
			
			
		

	


					
				
				
			

		

		
	


	

	





	
Link to comment

	
		
	
	
	

	
	
Share on other sites

	

	

	




	



					
					
					
				

					

					
					






	

	

	

		

			

				


	
		Colin Gilchrist
	

				
				
					
						
Proficient
					
				
			

		

		

			

				


Colin Gilchrist
			

			

				Posted 
				
			

		

	

	
	

		




	

		

			

				
    
					
					
					
					
					
				

			

			
		


		

			Posted 
			
			
				
				
			
		

	


	

    

	

		
		

			

If you look at the NCI data, the 1016 line has the Work Offset number. The value looks correct all the way until you get to the "Spot Bores" operation. That looks like Op 39 in your operations list (the picture you posted).


 


That operation uses Toolplane 5619. Are you saying that Mastercam just randomly generated this newly named plane with a new work offset? Is is possible that you just selected the wrong toolplane for those particular operations?



			
		


		
			

				
					
						

	
	
		

			
				
				

					
				

			
			
			
		

	


					
				
				
			

		

		
			

		
	


	

	





	
Link to comment

	
		
	
	
	

	
	
Share on other sites

	

	

	




	



					
					
					
				

					

					
					






	

	

	

		

			

				


	
		Sticky
	

				
				
					
						
Newbie
					
				
			

		

		

			

				


Sticky
			

			

				Posted 
				
			

		

	

	
	

		




	

		

			

				
    
					
						
  • Author
    • 
					
					
					
					
					
				

			

			
		


		

			Posted 
			
			
				
				
			
		

	


	

    

	

		
		

			

The spot bores and everything after that SHOULD be using 5619, it is a real wcs that I created, for ops on the other side of the tombstone, which are operations 39-42.


 


The G code I included for my first post is what my post is outputting for tool paths 22-25.


 


This is what it posts:


post-40824-0-35379900-1419651251_thumb.jpg


 


This is what it should be:


post-40824-0-68968400-1419651310_thumb.jpg


 


 


 


 



			
		


		
			

				
					
						

	
	
		

			
				
				

					
				

			
			
			
		

	


					
				
				
			

		

		
	


	

	





	
Link to comment

	
		
	
	
	

	
	
Share on other sites

	

	

	




	



					
					
					
				

					

					
					






	

	

	

		

			

				


	
		Sticky
	

				
				
					
						
Newbie
					
				
			

		

		

			

				


Sticky
			

			

				Posted 
				
			

		

	

	
	

		




	

		

			

				
    
					
						
  • Author
    • 
					
					
					
					
					
				

			

			
		


		

			Posted 
			
			
				
				
			
		

	


	

    

	

		
		

			

This is my first time looking at NCI data, but I see on 1016 it is using the correct offset just like you said.


 


So I guess this means my post has a problem? It worked fine in X6. The only other difference I have noticed with my post that is different in X8 is that it will not automatically capitalize the text I have entered for the NC file name.



			
		


		
			

				
					
						

	
	
		

			
				
				

					
				

			
			
			
		

	


					
				
				
			

		

		
	


	

	





	
Link to comment

	
		
	
	
	

	
	
Share on other sites

	

	

	




	



					
					
					
				

					

					
					





					
					
					
				

					

					
					





					
					
					
				

					

					
					





					
					
					
				

					

					
					





					
					
					
				

					

					
					






	

	

	

		

			

				


	
		Sticky
	

				
				
					
						
Newbie
					
				
			

		

		

			

				


Sticky
			

			

				Posted 
				
			

		

	

	
	

		




	

		

			

				
    
					
						
  • Author
    • 
					
					
					
					
					
				

			

			
		


		

			Posted 
			
			
				
				
			
		

	


	

    

	

		
		

			



I am curious...


 


When you updated your post from X6 to X8 did you read the update log to see if it reported any errors while updating the post?


 


I suspect it may well have reported errors




 


 


Ahhhh very interesting. I did not update the post, I had instructions from in house for updating and removing the post from the update process was one their steps.


 


How do I go about updating my post now?



			
		


		
			

				
					
						

	
	
		

			
				
				

					
				

			
			
			
		

	


					
				
				
			

		

		
	


	

	





	
Link to comment

	
		
	
	
	

	
	
Share on other sites

	

	

	




	



					
					
					
				

					

					
					





					
					
					
				

					

					
					





					
					
					
				

					

					
					





					
					
					
				

					

					
					






	

	

	

		

			

				


	
		Colin Gilchrist
	

				
				
					
						
Proficient
					
				
			

		

		

			

				


Colin Gilchrist
			

			

				Posted 
				
			

		

	

	
	

		




	

		

			

				
    
					
					
					
					
					
				

			

			
		


		

			Posted 
			
			
				
				
			
		

	


	

    

	

		
		

			

Hi Dave,


 


This is a bug in your post for sure. I sent you a reply email. Your 'pcheck_wcs' post block is overwriting the value of 'workofs$'. Something is broken in your 'while' loop.


 


Here are some screen shots of the debug:


 


This is when just entering the beginning of 'pcheck_wcs'


 


post-14313-0-27256800-1419915612_thumb.png


 


This is after the 'while' loop has run, but before we run the equation on this post line:


 


post-14313-0-68798700-1419915688_thumb.png


 


And here is the result after running the equation, and returning from the call to 'pcheck_wcs':


post-14313-0-07384900-1419915732_thumb.png



			
		


		
			

				
					
						

	
	
		

			
				
				

					
				

			
			
			
		

	


					
				
				
			

		

		
			

		
	


	

	





	
Link to comment

	
		
	
	
	

	
	
Share on other sites

	

	

	




	



					
					
					
				

					

					
					





					
					
					
				

					

					
					





					
					
					
				
			
			



		

	


	
	
	
	
	
		
	

			
				
				

	
		

			
Join the conversation

			

	
				
					You can post now and register later.
				
				If you have an account, sign in now to post with your account.
				
			

	
		

	




	
	
		
	
		
	
		
	
	
		
		
	
	

		

		


	
		Guest
	


		

			
				
					
				
					
						
    
							
  • 
								



	
	
	
	

								
							
    • 
						

					
				
					
				
			
			
				
					
						
							
						
						



    

		
		

			
		

		
			
 Reply to this topic...

		
		

			

				
					×
					  Pasted as rich text.   Paste as plain text instead
				
			

		

		

			

				  Only 75 emoji are allowed.
			

		

		

			

				×
				  Your link has been automatically embedded.   Display as a link instead
			

		

		

			

			

		

		

			

				×
				  Your previous content has been restored.   Clear editor
			

		

		

			

				×
				  You cannot paste images directly. Upload or insert images from URL.
			

		

		
	

		
	

	

	

		

			×
			
		

		

	



						
					
				
					
				
					
				
			
			
    
				
					
						
					
						
					
						
							
  • 
								

    
	

    
								
							
    • 
						
					
				
				
					
  • 

	

    • 
				
			

		

	



			
		

	

	
		

			
				

					


    
          Share
    

    

        
        
            

            
        
    


				

			
			

				


			

			
		

	







	

		
			
				Go to topic listing
			
		
	

	




						


	

		
    
			
				
					
					
  • 

    
    
    
        
            Recently Browsing
        
        
          0 members
        
    
    
    
    
        
      
            
                
    • No registered users viewing this page.
      • 
            
        
    
        
    
    

    • 
				
			
		

	


					

					


				

					

              	


	

			
			

				
Join us!

				


	

	eMastercam - your online source for all things Mastercam.





	Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.





				
		

		
		
			

				
Useful Links

				


	Contact Info





	Subscribe to eMastercam News





	 



			
			

			
			
			

			
Legal

				
			

	Privacy Policy





	Store Terms & Conditions





	Forum Guidelines



			
			

			
			
			

				
Follow us
				
					
					



    
	
		
		
		
	
		
		
		
	
		
		
		
	



			

			
		



			

			
		

		

		
		










		



	

		×
		


    
	





			
				

					
				

			

			

			

			
		

	






	

		×
		

			
    
				
  • Create New...
    •