Status bar disappears

[paulfell]

running x8 - if i go to print preview - then print - when i close print window and return to mcx graphics screen - the bottom status bar has disappeared.

I have found by trial and error that if I have the print settings in mcx to portrait - the problem does not happen (so far) - but if setting is landscape - which is what i want - as monitor screens are landscape - then it happens approx 1 out of 3 times ( i.e. the status bar disappears)

I can work around problem by leaving it set in portrait - any ideas on permanent fix ??

[paulfell]

i forgot to mention- i can get status bar to reappear - but only by closing mcx and then reloading 

[JoshC]

thats odd, i would try going into advanced configurations (start menu-->mastercam-->utilities-->advanced configurations), under reset, choose status bar. See if that does the trick, if its not that give your reseller a call. hope this helps

[paulfell]

thanks - i did try that - but it didnt restore status bar 

[paulfell]

STARTED DOING IT WITH SETTING ON PORTRAIT NOW AS WELL !

[tim_h]

This is happening to me as well.

Just started, exactly as described above.

Any fix found on this ?

or is it just one of those quirky things that happens occasionally...

 

thanks

[JoshC]

Hmm that is Odd, if what i reccomended previously did not work, you could try settings --> customize and if you look in the upper right there is a reset button you could try. If that still doesnt fix the problem contact your Mastercam Reseller and they should be able to help you through.