Mpmaster X9

[Justin Beebe at Folsom Tool]

I finally started using X9 and can't seem to find the link to download the X9 mpmaster post.  What am I missing here?

[AlbertZini]

Update  X8 post 

[gcode]

It looks like InHouse has not released them yet

 

http://www.emastercam.com/board/files/category/5-post-processors/

[Justin Beebe at Folsom Tool]

AlbertZini,

 

Thanks for the video.  I updated my X8 machine def, control def, and post while I was waiting for a reply to this thread.  I was really looking for a downloadable version of the mpmaster post for x9.  I'm not sure if or when that will be released.

 

Thanks again

[Justin Beebe at Folsom Tool]

Thanks gcode.  I thought that may be the case.

[DanielGingras]

Hello Justin, In-House is still working on MPMaster for X9. The post guys have a couple updates they want to make before releasing it to the public.

[gcode]

Hello Justin, In-House is still working on MPMaster for X9. The post guys have a couple updates they want to make before releasing it to the public.

updates ???  cool .. mpmaster is my favorite 4X post.. looking forward to new toys

[Newbeeee™]

Hello Justin, In-House is still working on MPMaster for X9. The post guys have a couple updates they want to make before releasing it to the public.

It's all gone to rat since that Tyler bloke left...

[DanielGingras]

Hello everyone,

 

MPMaster and MPLMaster for X9 have been released! They can be found here:

 

http://www.emastercam.com/board/files/file/1088-mpmaster-master-g-code-post-version-x9/

 

http://www.emastercam.com/board/files/file/1089-mplmaster-master-g-code-post-version-x9/

[Mick]

Hello everyone,

 

MPMaster and MPLMaster for X9 have been released! They can be found here:

 

http://www.emastercam.com/board/files/file/1088-mpmaster-master-g-code-post-version-x9/

 

http://www.emastercam.com/board/files/file/1089-mplmaster-master-g-code-post-version-x9/

 

I have to say, you guys do a great job with the MPMaster range of posts. I've always been impressed with the quality of output with these.

 

Do you still do an Okuma version?

[hoa01841]

Cannot able to download, no permission

[Jasiu]

I don'y understand how I get M08 before tool change, I'd like it to be in G43 line but can't move it there. Does anyone have a solution?