PLS HELP ME THANK YOU!!!

[null*30]

hi guys pls help me i need the mastercam x8 lessons , guide book or text book pls help me thanks for support.

[null*30]

 

Mastercam X8 Home Learning Edition can u give me this book

[krosen]

That isn't a book its a home use version of Mastercam software

[Guest]

I also believe the Mastercam X8 HLE will have expired by this point in time

[DanielGingras]

Hello,

 

What sort of things are you looking to learn in Mastercam? 2D mill, 3D mill, lathes, routers, etc. All of our Mastercam X8 books can be found here: http://www.emastercam.com/board/store/category/161-mastercam-x8/

 

If you tell me what you want to do in Mastercam I can direct you to the appropriate books that would help get you there.

 

All of our X8 books include a copy of the X8 Home Learning Edition/Demo software. It will expire this summer but if you purchase your materials through our online store you will be able to download a newer version to use instead. 

[null*30]

maybe some one download this book

maybe can u share that book

[null*30]

Hello,

 

What sort of things are you looking to learn in Mastercam? 2D mill, 3D mill, lathes, routers, etc. All of our Mastercam X8 books can be found here: http://www.emastercam.com/board/store/category/161-mastercam-x8/

 

If you tell me what you want to do in Mastercam I can direct you to the appropriate books that would help get you there.

 

All of our X8 books include a copy of the X8 Home Learning Edition/Demo software. It will expire this summer but if you purchase your materials through our online store you will be able to download a newer version to use instead. 

i m a student i learning mastercam first time i need the study my self

[DanielGingras]

Hello,

 

If you're just starting out with Mastercam your best bet would be to begin with our Mill level 1 Training Tutorial, you may purchase the printed version here: http://www.emastercam.com/board/store/product/707-mastercam-x8-mill-level-1-training-tutorial/

 

You can also purchase a PDF version of it here: http://www.emastercam.com/board/store/product/726-mastercam-x8-mill-level-1-training-tutorial-pdf/

[htm01]

when someone joins, adds no information in there profile and starts out asking for how to use MC makes me think "argh matey"

[CADCAM3D5AXIS]

^^^ Nice Patch ^^^