cnc programming

[patch]

Hello there I am a cnc programmer with over 20 years experience programming and set-up

I am seeking programming employment. I am looking for any help in this area. I am dealing with

an small injury  which does not allow standing for long periods but any programming jobs posted

usually include operating. if anybody has an idea to help I would be very interested thanks everybody.

[Bob W.]

Where are you located?  What skills do you have?  I assume programming with Mastercam?  What machines have you programmed for?  Any CAD skills?  Multi-axis skills?  In which industries have you worked?

[patch]

Thanks for answering. my skills are in programming and job planing fixture design and making and set-up I have programmed Haas ,Okuma , Kia , Leadwell and Cyclone.

created solids and surfaces from prints. yes I can program multi axis. I worked in the military and aerospace industries.

[RaiderX]

Location?

[patch]

Thanks for reply I live in Toronto / London  area Canada.

I also wrote my own programs by hand for many years so familiar with g code and editing.

[Matthew Hajicek - Singularity]

I've gotten most of my good job leads through Linked-In.

[patch]

Wow that's a great idea thanks a lot for that help.

[Brad Lisle]

Also try look for a technical recruiter in the CNC industry. I highly recommend Brian Cerkas. He is based out of Chicago area, I'm not sure if he goes into Canada as well but could probably set you up with someone. Try doing a search for him in the job opportunities forum.