Question for Fanuc guru's regarding 31iMB Prgm Check screen.

[neurosis]

We have a new OKK VMC that so far we are really liking. There are a few minor annoyances that probably have to do with machine set up. 

 

When we are on the program check screen on this machine, MDI and program editing seem to be disabled.  Is it possible to enable editing and MDI on the 31i MB contol when on the program check screen?

[Cory M. Pio]

Program check is something i only ever used in memory mode. When i hit check during a cycle it allows me to see distance to go and modal commands on the left along with the program lines on the right.