Manual entry

[Scott Bond]

Hi all

How can I get rid of the ( ), but leave the M0.

 

M5 M9

G91 G28 Z0.

M01

T1 M6 (T-1 - .75 ROUGH E.M. 1.750 LONG )

( M0 )

( ADD 1-4 20 BOLTS )

( WITH SURFACE PROTECTION )

( TO MACHINES SURFS )

( CYCLE START )

( ROUGH TOP OF OUTSIDE STEP )

G0 G90 G111 X-3.235 Y-34.55 S2200 M3

G43 H1 D1 Z2. M8

 

 

Thanks Scott

[Jimmy Wakeford from Barefoot CNC]

in the pcomment2 postblock there are some different conditions check for.

 

I f pick 1006 in the manual entry box and then in the post block make a condition for it.

 

I dont have post on this pc its my kids gaming pc, but I think this will work.

 

pcomment2

___if gcode = 1005,...

___if gcode = 1006,...

___if gcode = 1007,...

___if gcode = 1008,...

 

HTH

[Scott Bond]

My post looks like this

Should I change something here?

 

pcomment #Comment from manual entry (must call pcomment2 if booleans)

pcomment2

 

pcomment2 #Comment from manual entry

scomm = ucase (scomm)

if gcode = 1007, "(", scomm, ")"

else, "(", scomm, ")", e

[Jimmy Wakeford from Barefoot CNC]

quote:

---

pcomment2 #Comment from manual entry

scomm = ucase (scomm)

if gcode = 1007, "(", scomm, ")"

else, "(", scomm, ")", e

---

try this:

 

pcomment2 #Comment from manual entry

scomm = ucase (scomm)

if gcode = 1005, "(", scomm, ")"

if gcode = 1006, scomm

if gcode = 1007, "(", scomm, ")"

if gcode = 1008, "(", scomm, ")"

 

and make sure to check 1006 in the manual entry box

[Scott Bond]

I got this

 

Processing file with MPHAASV-AUTO...

Variable not defined: pcomment2

Post line number 507

Program execution halted due to error(s) in .pst

 

And the ( ) are still on M0

 

Still looking

[Jimmy Wakeford from Barefoot CNC]

Scott

pcomment2 is called from pcomment

 

pcomment

__pcomment2

 

pcomment2

...

...

...

 

if you use scomm inside of pcomment it goes away, so call pcomment2 and you can reuse it.

 

look at mpfan.pst and the way the post blocks are called.

 

make sure there are no spaces in front of postblocks and that they are in front of the if statements(I cant get the code to look right here.

[Finecut]

Scott

I fixed the haas post for comments by opening the mpmaster and a haas post side by side in the cimco editor. Look at the comment lines in both then edit in the comment lines from the mpmaster to the haas post. Then I commented out the old lines in the haas post with a "#"

It worked great

 

Finecut

[Scott Bond]

I'm home now,I will try again tommorow.

Thanks

[Thad]

I just got this to work. Thanks Jimmy!

 

Thad