Another Cimco Issue

[BrianP.]

I am running 2018 beta 5 release. When I fire up Cimco that comes with Mastercam I get this warning:

 

 

I can fire up V7 Cimco that came with 2017 and no problem. We just updated our Mastercam license so we are good to go on that for another year. I'm not positive but I think this may have started after that.  Can't really remember the exact day it started.

[Jayson Kramer]

BrianP , you say another what was the other issue. this one is related to the Temp license in the Beta of Mastercam 2018. This will be fixied on the next release Cimco and CNC are aware and are taking care of it.

[BrianP.]

36 minutes ago, Jay Kramer @ Precision Programming said:

BrianP , you say another what was the other issue. this one is related to the Temp license in the Beta of Mastercam 2018. This will be fixied on the next release Cimco and CNC are aware and are taking care of it.

I read almost all the posts here so I had seen that John and Jeff had issues with Cimco. This one seemed to be a little different than what they had experienced. Good to hear that is being addressed. Hope it's in the next 16 days . Thanks for the response

[jeff]

4 hours ago, BrianP. said:

I read almost all the posts here so I had seen that John and Jeff had issues with Cimco. This one seemed to be a little different than what they had experienced. Good to hear that is being addressed. Hope it's in the next 16 days . Thanks for the response

Yep, same issue I have. Hopefully it's fixed within 16 days