unknown Mastercam message this morning

[Joeyls319]

Morning everyone.

Fired up Mastercam this morning after the long weekend and all my settings were screwed up.  After I reconfigured my right mouse button options, I got the message seen below (screenshot) when I clicked out of the wondow.

Can someone tell me what this means and how to fix this issue?  I opened up  another Mastercam window and none of my settings were there.  I would hate to have to reconfigure everything every time I open Mastercam.

[Guest]

That path looks to be a place that is non-writeable.....

Looks like a path in your config might be hosed

[gcode]

"disk full while accessing ...." is your hard drive full??

or maybe you've used up all the space allocated to your My Documents folder???

 

[Joeyls319]

Thanks for the input gentlemen.  

Not sure what's going on.  I removed the workspace file from the config folder and I rebooted the computer a few minutes ago because mastercam was "acting" strange and now everything seems to be alright.

 

[joe-y]

Had same problem now but in newer version. Removing the workspace file will avoid getting message, but will lose your saved settings unfortunately.

Do not usually write comments in, but situation to resolve ours, difficult enough, was due to Ransomware protection setting.

After shutting it off, works back to normal. Hopefully sharing will allow others to avoid in future.