Vb6 program

[wtsylvester]

So i wrote this program in VB6 and what it does is turn a single part program into a program with x number of work offset, according to haas

...it's really setup for the haas and mc post we have...

 

it's a whooping 36k , u need vb6run file of course..

 

so do I upload it to the ftp site?.. e it upon request..what... I'm not sure of the what the procedure is

[Rekd™]

You wrote it, so as long as there's no copyright infringement or piracy involved, go for it.

 

'Rekd

[Toolfab]

As long as you are the one that wrote it, and you dont mind sharing it, just upload it to Jay's FTP and tell us wer it is.

 

Sounds pretty cool!

 

[crazy^millman]

Yeah be cool to check it out. If you can't access the FTP then email it to my emial on my profile and I will put it up there for you.

[wtsylvester]

so it's in the

ftp://www.ppcadcam.com/Mastercam_forum/unspecified_uploads/

folder

[wtsylvester]

local_subs.exe

 

I guess if I had put that all one one line

 

it's for haas's only

 

G54-G59 and then it's G110 to G whatever it is

[MACHINEMASTERG]

im a little confused what does it take to run this tried as a vb script but its an exc file do you post first ??? what up from the lowest paid machinist down at sea level

[wtsylvester]

yes , you post the nc code first, it reads it in then parses it to multiples

 

I guess I could change it around and make it a .dll run from a script

[wtsylvester]

you need the file ..... msvbvm60.dll

to run , more than likely there on any newer windows, other you can d/l at alot of places

 

http://www.dll-files.com/dllindex/dll-files.shtml?msvbvm60

 

is one

[MACHINEMASTERG]

thanks bill

i just saw your email tonight at home so i replieed back ...ill check it out tommorrow at the factory