New computer - lathe post outputs X instead of D

[Smit]

Just got a new computer and now trying to get it configured. Congig wasn't a problem but now trying to figure out how to import my right click menu.

One thing that puzzles me is my lathe post is outputting an x and radius rather than a D and diameter. It's the same machine and post but it's posting different code.

Anybody have any idea what I should look for to change it back to diameter?

:Edit: Old box was Windows 7, new box is Windows 10. Using Mastercam 2017.

[BoscoDrummer]

I believe that should be a setting in the post. I would double check that first to see if its still set the way you should be seeing it.

[Smit]

13 minutes ago, BoscoDrummer said:

I believe that should be a setting in the post. I would double check that first to see if its still set the way you should be seeing it.

I thought it was a switch setting but I can't find it in the post.

[gcode]

this is the switch in my posts

 

dia_mult     : 2     #Multiplier for output on X axis (Neg. switches sign of X)

 

[Smit]

25 minutes ago, gcode said:

this is the switch in my posts

dia_mult     : 2     #Multiplier for output on X axis (Neg. switches sign of X)

It must be a different switch in my post. Thanks for looking.

I've sent a z2g file to my mastercam retailer, hopefully they'll find it.

[Guest]

It actually changed the letter from D to X?

If that's the case, to me, it sounds like a different post....there's no switch in a post for that.....

[jeff]

I agree, double check to make sure you're using the correct post if it changed. 

[Smit]

No, sorry, bad description by me. It was an X but the output was the diameter, not a D.