wcs view manager help

[Shady]

I am having a problem with my wcs view manager. When I open the view manager all of my lines for system views are blank. If I click on a line, the system view does change. The system view display is set to all. Also reset c/t plane and update graphics are checked.

I am using M/C mill V9 sp1.

Any Ideas???? I know I screwwed SOMETHING up!!

 

Thanks ~~~~Shady

[robk]

quote:

---

I am having a problem with my wcs view manager. When I open the view manager all of my lines for system views are blank

---

Shady,

 

Do you have system view disply checked to none?

[robk]

quote:

---

I am using M/C mill V9 sp1.

---

In my opinion you should also get sp.2. It had some fixes for the wcs in it.

[Shady]

No...it is set to "all". I may try sp2. I dont know what happened to my view manager...it was working...then one day nothing. It does still work though....it is just as if the writing is invisible. Thanks for the help~~~~~Shady

[Shady]

Sorry to bring this one back up...but I still havnt fixed it. It has been a real problem for the part that I am currently programming. Any ideas at all???? Thanks ~~~~~~Shady

[crazy^millman]

Well I do thing what most would consdier the hard way for this but works for me. I do all my different stuff or different c-planes and t=planes on different levels doing all of my construction on these levels I then call that level my same number as my C-plane I am using. I have never got the WCS thign to ever say anything different that system view and I have 9.1 SP2. I have read help atleast 20 times and do everything it says still no good so fu?k it. Really pisses me off you do somethign just like the directions tell you in help no good WTF. I do keep track of them another way with pen and paper sucks also but works and gets the job done. Sucks when you got about a 120 c-planes you are doing work with and and you are trying to remember which one is doing what for each operation on your part.

[Eazy]

I am praying for some major refinement of the WCS View manager. I'm not holding my breath though!!

 

[Eazy]

In Version 10 that is!!

[Shady]

Thanks for the advice Ron, I guess I will just have to get used to it. Most of my work is so simple that I dont even need it...I am just now expanding my horizons and looking at some more efficient ways of machining our parts. Its making it harder ...although more challenging for me, but more accurate and much easier for my operator. Thanks again ~~~~~Shady

[Tim Johnson]

I used to have a hard time with the WCS also. I found that if I set, change or turn off WCS in 3d

construction my problems went away.

[cadcam]

Shady have you buy chance change the window size.

 

Do you see the following collums?:

 

V#, WO, Name, Ops ,Display,WCS

[Shady]

I see v# but none of the others...how do you change the window size? Thanks ~~~~~~Shady