Matsuura pallet variable?

[medaq]

have dug through the books and had no luck.

 

Does anyone know on a matsuura hplus300 horizontal, if there is any macro variable in the control that can tell me which pallet is in the machine.

 

Trying to write a macro and really could use to know which pallet is in the machine. This is for a pc15 and a FMS pc24 machines.

 

Thank you

[GoetzInd]

Not sure about Matsuura, but on Makino there is an M-code that dumps the current pallet number into a macro variable (#110). Maybe they handle it in a similar fasion? 

 

Mike

[medaq]

13 hours ago, medaq said:

have dug through the books and had no luck.

 

Does anyone know on a matsuura hplus300 horizontal, if there is any macro variable in the control that can tell me which pallet is in the machine.

 

Trying to write a macro and really could use to know which pallet is in the machine. This is for a pc15 and a FMS pc24 machines.

 

Thank you

 

 

Sorry, not sure why it posted with grey text. 

 

If there is a m code to do that, I have not found it yet. I will try digging through the books one more time. 

[Tim Johnson]

For Enshu #1000 is for pallet A and #1001 is for pallet B. On our Kitamura #1001 is for pallet A and #1000 is for pallet B. This sounds like an e-mail with your service department.

[crazy^millman]

Shoot an email to them and they will help you out.

[medaq]

On 2/15/2018 at 5:51 AM, C^Millman said:

Shoot an email to them and they will help you out.

I did that, apparently there is no pallet value you can use.