Mastercam Toolmanager

[Frankieboy]

anyone know if Toolmanager is available as standalone installer ? 

it does not require the hasp to be in the computer i have recognised 

i have a Zoller presetter  , and would be very nice to have the toolmanager installed ,,, but of course not the complete mastercam package 

[GoetzInd]

It is not possible as far as CNC software tells us. We have done the exact same thing and CNC Software said we must do the full install. Not a big deal, we just installed and fired up MC once on the Zollers and just use the tool Manager.

Mike 

[Colin Gilchrist]

Mike has the correct answer. Just perform a full installation of Mastercam on that computer, and run Mastercam 1 time, with the Hasp installed (or tagged to the NetHasp). From them on, you'll be able to use the Tool Manager without needing access to a Hasp on that computer.

[Frankieboy]

thanks , i knew that 

would be nice with a seperate installer for toolmanager in future releases 

[GoetzInd]

Yes. It would be nice. We are actually however in the process of completely eliminating the CAM tool library all together and replacing it with a tool management system such as Zoller TMS, TDM, or Wintool.

Mike