Batch converting SLDPRT to MCX (MCam 2018)

[VINK]

I have 50 Solidwork Files I'd like to batch convert to MCX files but I am having no luck. I go to File>Convert>Import Folder and then nothing happens. No prompt to select anything. I have to hit ESC to get out of there. Am I missing something simple here?

Thanks for the help

[Pete Rimkus from CNC Software Inc.]

Check to see if the dialog popped up on a 2nd monitor or under another window.

It should show you a dialog like this:

Edited April 12, 2018 by Pete Rimkus from CNC Software Inc.

[VINK]

I was talking to our reseller about this issue and they asked if I have a second monitor connected periodically. I actually have a second monitor connected full time. It is behaving as if there is a hidden active window though but I cannot find it. Mastercam itself just keeps giving me the chime sound when I click stuff until I hit ESC to back out. Perhaps it's a Windows issue?

[gcode]

If you are running Nvidia graphics cards and multiple monitors, make sure you have enabled the

Nvidia Desktop Manager.

It should be located in the Control Panel