Parameter for TOTAL RUN TIME

[PcRobotic]

Hello everyone,
   I would like TOTAL RUNTIME in the backplot to be appeared into my post and I tried to look for the PARAMETER# and I couldn't find it.  Is there another way to find out what parameter number it is?

 

 

Thank you...

[Zaffin_D]

There is no parameter number for that value.

However, you can estimate the total time in the post.  Look at MIll2.set (installed with Mastercam) for an example of how to calculate the total time. 

[crazy^millman]

4 hours ago, jeff.D said:

There is no parameter number for that value.

However, you can estimate the total time in the post.  Look at MIll2.set (installed with Mastercam) for an example of how to calculate the total time. 

Funny MPmaster is just Mill.set and Mill2.set in a posted code format.

[AlbertZini]

https://www.emastercam.com/forums/topic/74520-cycle-time/?do=findComment&comment=874448

[crazy^millman]

2 hours ago, AlbertZini said:

https://www.emastercam.com/forums/topic/74520-cycle-time/?do=findComment&comment=874448

Funny the same person asked question in that topic and here we are some years later still trying to sort it out.