Need help with getting rid of canned cycles for drilling.

[JHaley]

Hey everyone, this is my first post on here. I have a Multicam 5000 series router and I use Mastercam for Solidworks. My issue is with drilling, my machine doesn't like canned cycles so I went into my CD and unchecked the boxes to enable the canned drilling cycles. However, it didn't change a thing, I called My seller and he connected to my computer and verified that I did the right thing. He had me zip2go all my stuff and he told me that it must be the post. It is now a week later and i got my edited post from them and it still doesn't work. If anyone on here has and Idea of what's going on I'd appreciate any info I can get. Thanks.

[jlw™]

I just did a quick test on MPMaster and simply unchecking the drill cycles in the control def works.  Can you share a zip2go?

[JHaley]

Absolutely, Sorry for the long delay with the holiday and all.

New Drill Test.zip

[Colin Gilchrist]

After you edit the Control Definition, you must do a "replacement" operation to swap out the Control Definition in your active file, and also Regenerate the operations.

[JHaley]

Unless I did something wrong in the process, I did exactly that. I'm relatively new to MasterCam so I can't rule out operator error lol.

[Chris In-House Solutions]

JHaley,

Looks like you did the right process to turn off the Canned drill cycles.  This does appear to be a post mod that needs to take place to make your request happen.

[JHaley]

So we ended up having a guy we know that happens to work for our seller come by and he managed to get everything straightened out. In case anyone is curious what he did I've uploaded it.

Drilling Fixed.zip