Posting help

[Greg_J]

Hey guys,

I keep getting a G94 in my programs when ever I do a helical move, I've found it in my post but I'm not sure how to get to stop posting. I also have issues with my coolant, I need it to post m25 and m26 for air blast and through the spindle air, any ideas how to get it to work?

 

Greg

[crazy^millman]

Greg assume this is version X? Look in the post for force feed rate per inches switch and turn it off. Might need ot review the logic in the post and make your own use or not use G94 if you do have a need for it. I assume this is a MPMASTER. It does not have a switch for this so make your own. If you need help let me know and I will be glad to help you out when I get some free time. It might also be in the control def so take a look there as well.

 

HTH

[Ocean Lacky™]

 

 

 

For the Coolant

[Greg_J]

Yep, X4.

 

Mpmaster Heidenhain.

 

Some one added it to the post hoping it would help with the rotary axis feed rates, it didn't help and a get a error on the controller when Its used.

 

Thanks for the help.

[crazy^millman]

Some one added it to the post hoping it would help with the rotary axis feed rates, it didn't help and a get a error on the controller when Its used.

 

Sound like they need to fix the problem they created. Just look for the place in the post where G94 is and take it out and at least you would quit having the problem.

 

HTH