ken wong
-
Posts
128 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by ken wong
-
actually it is only not working with the file programmed in previous version . but if program made in x8 that feature works ok
-
thanks for answer. but my lockfeedrate not checked in setting
-
in x6 when i change feed rate in tool definition all operation use that tool will change but in x8 when changing feed rate in in tool definition only one operation will change, do i do something wrong?
-
thanks
-
Hi! Where can i get prmdefault c-hook for x8 ? thanks!
-
x8 force toolchange make tool change in every depth ?why
ken wong replied to ken wong's topic in Industrial Forum
look at Common User-defined Variable Initializations and put # at line #force_tlchg$ : 0 #first operation marks input SOF as done, ASCII NCI toolchange Gcodes are not altered that i change in hass 5axis post not sure about mpmaster -
x8 force toolchange make tool change in every depth ?why
ken wong replied to ken wong's topic in Industrial Forum
no problem i found it in post -
x8 force toolchange make tool change in every depth ?why
ken wong posted a topic in Industrial Forum
I test x8 with hass 5axis post come with mastercam ,when i turn on force toolchange post give out code of tool change at every depth of cut i know that is from post how do i escape from that -
thank i already try but not work , i will try more in mis parameter
-
Thanks Sticky that is the way i do on my horizontal with that post modify from in-house for 4 axis i dont think that post will work for 5 axis machine
-
hass 5axis post modification for indexing
ken wong replied to ken wong's topic in Post Processor Development Forum
right now mi 7 = 1 ,and enable limit that will be fine . my machine z+ limit is 18.1 and machine will retract to 18.1 and machine will go over travel on difference tool because tool lenth offset we set from tool tip to centre of rotation i want : G91G28Z0. G00 X.. Y... A... C... : MACHINE REPOSITIONING G43 H.. then go on thanks for quick reply -
Hi!i try to modify hass 5 axis post come with x7 to work with mazak variaxis 5x- 16i fanuc control. So far some how it ok. because we do only indexing work 3+2 so i want to mordify some more thing to meet our need 1-how to force full retract when machine change tool plane(right now we control by force tool change) 2-how to output difference WCS :G54 G55.... when machine change tool plane (like mpmaster post in 4 axis) right now i use only g54 in centre of rotation 3-how to output G10 x,y,z according to G54 G55.... Thank you very much
-
Hi!i try to modify hass 5 axis post come with x7 to work with mazak variaxis 5x- 16i fanuc control. So far some how it ok. because we do only indexing work 3+2 so i want to mordify some more thing to meet our need 1-how to force full retract when machine change tool plane(right now we control by force tool change) 2-how to output difference WCS :G54 G55.... when machine change tool plane (like mpmaster post in 4 axis) right now i use only g54 in centre of rotation 3-how to output G10 x,y,z according to G54 G55.... Thank you very much
-
thank! i found it but it is no stick and i have to set it every time runing verify?
-
i test x7 facing tool path and verify it and i have this error .how to get off that
-
multisurface axis toolpath then curve 5 axis with 1/4 em works just more time thanks any way
-
it give out same thing , i notice one more thing is out end mill need to grind flat at end too but why mastercam give g cod with z up and down and tool not alway touch to floor
-
Hi guys! I have to this part on horizontal full 4 axis and i got problem on slot 1-I try 5 axis curve but z move up and down .002'',( the same with mpmaster or mpfan post) 2-i try axis substitude or rolldie z keep stable but it goes to wrong place and g code wrong with mpfan and not post at all with mpmaster what did i do wrong or missing please help 08-01-COMPLIER RING.MCX-6
-
thanks alot it is in link stuff, thanks
-
i have do this in 4 full axis horizotal machine and it work with 5 axis curve but not with swaft and i want to lead in and exit but can you tell me how 08-01-COMPLIER RING.MCX-6
-
+1 Teh Bear
-
thanks
-
Hi!all . How take out G94 from mpmaster post , our old machine gives alarm with G94. Thanks in advance!
-
Thanks ! i have done with 3/8 then .484 drill sfm:50 ,speed .001per 1/16 , peck .02 with G73,
-
HI everyone Any ever drill niobium i need to drill .484 dia hole to 3.6 deep and what kind of tool do you use thanks alot
