Camalot, do you know how to set Operation defaults in the control file?
as stated by Leon82 this will fix two out of 3.

Hopefully this help with your needs.

I have the install and it may work on a Windows 10 if you are running a a Network license as the drivers are not support for a single hasp. I have V9.1 on a laptop that runs on Win10 as long as you have a nethasp.
V6 was on floppy. I copied all the files to my server. I go as far back as 5.5. The V6 install is 6.13A being the last install for that version before I went into beta testing of V7.

V7 was the first version to offer the op's manager. you could only regen the 2D paths not the 3D or multiaxis.

Pete please let me know if you want to try and install and get running?

Drive surface= As usually seen in the classic style paths . This defined as a Surface entity or entity's along with Sold face or faces as the entity you want to drive the tool path motion over. As the thought of driving the tool over the surface as known in 3D tool paths and some 5axis.
Most of the new 3d surfacing paths call it Machining Geometry
 

Drive Curves are thought of the same way, except the usually are using wire frame curves to drive the tool instead of surface or solid faces.
These are also not seen as much in the newer Mastercam versions . used to see them call out that a lot in the older versions. What version are you running.

( In mastercam software,Hub=axis? ) you are asking if HUB means the Same as Axis?

Hope this helps.
 

1 hour ago, crazy^millman said:

Read this:

Jay it seems he doesn't have that, but has purchased it. His reseller asked him to get the CAD models for it and what he was requesting here and I had it. What you are showing looks exactly like what I had so then CNC Software does have the model, but the reseller is confused in asking him to get the model CNC software already has?

Ron, this the machine model in our Machine environment. I thought this what he wanted. and we all ready have this built. this is the Haas ST-10  Y_C_Hybrid .Machine
If this helps.

So you got the machine environment that looks like this as this does not have RT spindle ? and you are just missing some of the components you use in your shop and certain locators correct?

I can tell you now you will not gain any by putting on a separate drive. I would use the other drive for you files unless you keep them on a network server. 

To can a little performance with the SSD what type of SSD are you running are you running like a Mx2 style that runs on a faster bus so it runs faster or the old style SSD like 2.5 drive that runs the older slower bus?

On 10/13/2021 at 4:51 AM, TERRYH said:

Is there a way to make this stay as you set it and not change after one use, it's driving me nuts. In 2019 once you set it to in+ it stayed that way for the entire session, now you set it use it to do something and it goes back, I am doing lettering on a mold where my supervisor likes us to do each one individually to help get rid of so many scallops and I got to set it for every damn toolpath. 

I had not seen this issue during use or training and just did some testing on few files. has not changed unless I close Mastercam.
I surely see this driving me crazy for sure. but as you can see a few of us tested no issues it sticks.

2 hours ago, [email protected] said:

The chaining mode being stuck on last drives me nuts for sure!

Give this a look at.

On 9/2/2021 at 11:32 AM, Chally72 said:

This is a perfect opportunity to take advantage of the new parent/child plane relationships that you can build in Mastercam 2022. Even if not associated to geometry, planes can be linked to each other such that when the parent plane is moved (translated/rotated) the child planes will all move with it.

Dylan , this was I was thinking as I was reading down. great opportunity for this.

Sorry I turned off the FTP as there really has not been any call for it for a few years now.
Looks Like what you need you are able to get from Haas direct. this great news.

On 7/26/2021 at 4:07 AM, hle said:

Hi all,

First time to post here, we have a part have  to run on multus U3000, main and sub spindle with full B axis, do not have steady rest, only have spring center on lower turret. Any help would be appreciated.

Test.mcam

So are you running MT and wanting to add a turret mounted SR to the machine?

It was looking as you did not have the proper locators in the GMD so your dealer added the new locators and showed you how to make sure you have the proper selected ones correct?

I would contact your Mastercam dealer. See if there is anything that Mastercam MT can do for you with this machine.

Thank you.

Good Day JacobS,

 I would like to request if you could send your file to QC @ Mastercam.com attention to me Jayson Kramer. This way I can review and  help.
Please include contact info.
Thank you

Chris L,
if you want to play with the file they are talking about. I have the file and can send to you. it is a little different then what this picture is but not by much.

That is what Cimcos NCbase is built for not the editor.

Look at Morph if you have Multiaxis.

If you are running 2021 loo at Advance Drill works great for that and no post modes needed.

you are not using the correct locator. Are you trying to load a tool into a live tooling locator on the turret or is there a Baxis?

How did you setup you Stock in JOBSETUP in MT. as if it setup right should come in. what did you use for stock Bar stock,Revolved Stock, Solid stock or STL stock?
As you can see it works as expected in the Mazak IV 200ST shown here.

3 hours ago, THE ANDREWS said:

It was working fine for over a year or so. Still no luck in fixing it. We thought it may have been a Windows Update, but IT says it isn't. Unfortunately we do not pay maintenance anymore, so we may have to get the credit card out for the re-seller

 

 

Are you up to date on updates for windows as there was an issue or to at one point of the windows updates.

Do you have the Machine file for the Mazak Integrex I-200ST. Your reseller should told what directory it goes into.

Are able to share the file?