hello, Back plot bar is not showning when I try to back plot. When it does it disappears quickly Using Mastercam 2020 Was working fine few days ago. Need help.

But, I do not have Lradwell Mill. This is foir YCM VMC with Fanuc control

millman, What am I supposed to look at ?

This is how my post is set up. Looks different than what your reply. Confused as what to do ptap$ #Canned Tap Cycle if leadwell = 1, n$, "M29", *speed, e$ if peck_tap = 0, peck1$ = 0 # disable peck tap j_tap = peck2$ if (j_tap > 4) | (j_tap < 2), j_tap = 1 pdrlcommonb if peck1$ = 0, n$, *sgdrlref, *sgdrill, pfxout, pfyout, pfzout, pcout, prdrlout, [if leadwell = 0, *j_tap], *feed, e$ else, ptap_peck pcom_movea ptap_peck # (Peck Tapping) tap_depth = tosz$ - z_shift while tap_depth <> fmtrnd(depth$ - z_shift), ptap_peck2 ptap_peck2 # (Haas - Peck Tapping) pdrlcommonb tap_depth = tap_depth - abs(peck1$) if tap_depth < (depth$ - z_shift), tap_depth = fmtrnd(depth$ - z_shift) n$, *sgdrlref, *sgdrill, pfxout, pfyout, *tap_depth, pcout, pfrdrlout, *j_tap, *feed, e$ pcom_movea

H.TOM Thank you for info. I will try changing this on post . Hope fully I do not mess this up. Really appreciate your reply to me. God Bless

MC 2020 / YCM MILL. I need to post in IPR not IPM when tapping. How do I change this in post ? Can someone help out with this ?

I have tried to learn X2 but have not been able to learn it. Belive me, I have tried. Maybe it has something to do with my learning ablities(not trying to be funny). But up to version 9.2 eveything was pretty simple. X2,X3 I cannot get the hang of it. Machine definitions,tool paths,tools menu,all confuse me. I do want to learn it and will keep trying.

TheePres Somewhere I have a floppy that I got from a tool guy it was free and legal. It calculates measurement using any wires and also recommends best wires to use and all thread info you might need.I am sure you can also calculate pipe threads.All data can be printed. You can also input any special thread size,pitch that you want.I was already using Gage Master when I got this.Works great. Let me know if you want this and how to get it to you. God Bless All Joe

I will gladly donate more than what you are asking for. Just let me know where to send the money. Thanks Joe

count me in. Thanks Jovato

As always you guys are always willing to help and do help. Thanks to all Joe

Thanks, Harry.I can not get of hold of anyone at Mazak for info.I really appreciate the info from you. Joe

Hi! Trying to find the battery backup for a Mazak Intergrex 400Y,can someone help me out. Where is it located and does it have one? Thanks in advance Joe

Hey! What's the big deal. I let them push the start button on the machine. Is that still cheating?? Thanks to all for your help. God Bless America Joe

Thank you for your quick reponse and help Regards Joe