Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Yes Handshaking on
I use same laptop many years & cable is ok
PArity??
I am not familiar on that machine parameters
But I use the same laptop on that machine most of time so I think the parity is ok
Hello
When I load program from laptop to Mezak Horizontal boring mill RS232 port,The machine
gives the alarm
"10030 check sum error"
What is this alarm?
memory is full or something else
Please someone have any idea about it
Please note that the control is fanuc 110m
this is given by Dave
XP SP2?
http://www.emastercam.com/ubb/ultimatebb.p...t=012130#000010
jctjct, SP2 appears to set PASV as the default FTP transfer mode for FTP connections in IE. This won't work with the eMastercam FTP site. To remedy this, from Internet Explorer, go Tools | Internet Options. Click on the Advanced tab. Scroll down and look for "Use Passive FTP". Uncheck it. HTH
I make tool list simply like this and i liketo safe in seprate directory
Filtered Tool List for C:MCAM9MILLNC110-R16MC984E901398G1.MC9
Thu Jul 29 08:02:46 2004
Tool Number Tool Name
1 4" FLYCUTTER &.0625 C/RAD
7 C/SINK
13 CENTER DRILL
17 6" 45 DEG FACEMILL
40 27/64 HSS DRILL
42 7/8 SPADE DRILL FOR 1-8UNCTAP
46 1/2-13 UNC TAP
48 1" 8UNC TAP
52 7/16 DRILL
53 1.0" C/BORE TOOL OR 2F ENDMILL
56 3/4-ENDMILL
57 2" DIA ESCAR SIDE MILL
58 5/8 HSS DRILL
Hi Dave
Here I have problem with my email
So I am posting here
I took this from Mpmaster post
pcirout1 #Output to NC of circular interpolation
pcan1, pbld, n, `sgfeed, sgplane, sgcode, sgabsinc, pccdia,
pxout, pyout, pzout, pcout, parc, feed, strcantext, scoolant, e
This pcircout1 is ok for circlemill & contour
But for helicalmill we haveto force
as follow
pcirout1 #Output to NC of circular interpolation
pcan1, pbld, n, `sgfeed, sgplane, *sgcode, sgabsinc, pccdia,
pfxout, pfyout, pfzout, pcout, parc, feed, strcantext, scoolant, e
Please explain how can separate the force sgcode , X,Y Z only for threadmilling
After our email problem solve I will contact you to fix our all posts
Please someone recommend a good program to load & unload program from laptop to RS232 which has window Xp
All this time we use MIRROR3
It was good program but it is Dos version on a old laptop which gives trouble now
Thanks
Is it possible to use xform copy ,mirror,rotate
to make holes in one solid ?
or we have make chain one by one
Please give some ideas to make many holes or pockets on bolt circle
Or we will have these commands in future
Thanks
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.