You can ask The In-House Solutions Team

if you off the clearance plane it should be ok try and see

I think Ascii 03 Still check it out

Just now tried Yes it works Thanks

oh I sent my file to in house solusions now I wait for reply from them

You remember mypost yesterday

I have exactly *progno$, " (", sprogname$, ")", e$ and its out put O0 only

yes i did

In McamX our lathe posts are ok, but It does not out put the program number Do we have to setup anything on configuration Anyone have any idea ???? Thanks

thanks

Is ALL COMPONENTS.GMD the Cofiguration file? This the file similar to Version9 configuration or any other file Its confusing Thanks

Tool list for... C:Mcam9MillNCR16-200QFMC9684-243-201.MCX Wed Oct 12 07:27:35 2005 Number Tool Type Diameter Tool Name Corner radius Radius Type 5 - 1.0000 in., Face mill 5 5 Face mil 1.0000 in. 1.0" 90 DEG F 0.000000 in 7 - 1.5000 in., Csink 7 7 Csink 1.5000 in. C/SINK 0.000000 in 8 - 0.3750-16 in., Tap RH 8 8 Tap RH 0.3750-16 in. 3/8-16 UNC TA 0.000000 in 10 - 0.4375-14 in., Tap RH 10 10 Tap RH 0.4375-14 in. 7/16-14UNC 0.000000 in 11 - 6.3000 in., Face mill 11 11 Face mil 6.3000 in. 6.3 " FACEMI 0.000000 in 13 - 0.5000 in., Center Dril 13 13 Center D 0.5000 in. CENTER DRILL 0.000000 in 20 - 0.3594 in., Drill 20 20 Drill 0.3594 in. 23/64 DRILL 0.000000 in 24 - 0.4375 in., Drill 24 24 Drill 0.4375 in. 7/16 DRILL 0.000000 in 26 - 0.3125 in., Drill 26 26 Drill 0.3125 in. 5/16 HSS DR 0.000000 in 42 - 0.3680 in., Drill 42 42 Drill 0.3680 in. LTR. U DRILL 0.000000 in 50 - 0.5000 in., Drill 50 50 Drill 0.5000 in. 1/2" HSS DR 0.000000 in THis tool report On McamX I could not understand that the diameter of tool and the tool name only output tool number Is it possible to fill the diameter and tool name

what is x

If you make program for many machines and very often in Inch & metric mode What you do 1)Make each machine 2confiration one in Inch Other in metric 2)Or change configuration all the time when you make program in inch at inch configuration and in metric mode change configuration to metric 3)Do you have any other easy method Please some can give some idea Thanks

On mastercam version Cimco edit 4 When we compire the 2file ,it was easy to edit some changes Now we bought Cimco edit 5 , it does not allow to edit when we compire the file I do not understand on cimco edit 5,to edit something on when we compire files Please someone direct me how to do it Thanks

If it is vertical lathe may be G2 becomes G3 even that depends on which way you are looking If it is horizontal lathe I hope G2 is G2 & G3 is G3

thanks

Please someone tell which C-cook delete or clean multible layers of lines or arc on contours Thanks

I could not do it now & time to go home and I will try in the morning Thanks

Thanks I try and see

I tried many files but I could not update

I found easy to update milling Mc7 files in mc9 But in lathe files I could not update the mc7 files Because it says there is no geometry files But I have the geometry there. Is there any way to update the lathe mc7 files to mc9 ? If we can update please someone direct me how to do Thanks in advance

Is any possible to read windowpicture & fax viewer files (.tif extension) in mastercam If it is possible Please explain how to read it Thanks

Just you use the finish contour, it should be ok

By experience I spent time same as you