Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hello all
Is there any c-hook or options to wrap a 2D-spline over a cylinder...
I have tried using X-Form/Project and X-Form/Roll
but i am unable to hold the total 3-D length of my spline...i.e, the 3-d length gets changed after rolling or projecting.
thanks in advance
Hello all!
I do have a problem in getting a new toolbar for C-Hooks which are not in customizeMastercam c-hookscategory.
I unable to find my new c-hook in the category
Is there any other way to add a new c-hoook to this list or change the existing comands button to map some other c-hook
thanks in advance
MCX closes while performing some operations like backplotting, verify, file save, dynamic spin, hangs without any reason.
but iam not doing the same task when this happens repeatedly
Dear All
I had lost my status bar while working some toolpaths. I dont know what made me to loose the one. can anyone suggest how to get it back.
I had also tried reinstalling in the same pc.
thanks in advance
regards
Sunder
Hello rao_ime
WELCOME TO THE GROUP
check ur sytem bios config. whether ur com port is enabled,if not please eneble it.I had encountered the same problem
rgds
Sunder
Hi
select tangent dimension from either toolbar or create/drafting/dimension/tangent dimension
choose any arc for first point and other points,lines,arcs,etc for second point.
Tangent dimensions selects ARCS as first points for dimensioning
Ya thanks,its working
But earlier with the same settings even enabling SCALE 100% ACTUAL SIZE with A4 metric sized sheet I can't get it.
now after changing sheet size its working,I am afraid that config files also affect printing
rgrds
Sunder
draw a circle of dia equals ur component
place points where u want to drill
select caxis drilling and choose drill bits & parameters remember to give the dia of the circle in rotary axis button
dear all
i hav to cut strong fibre material
what can be the proportionate cutting parameters compared with aluminium or other soft mtls
i hav to develop a plug in fibre for a forming die
thanks
regards
Sunder
chennai
Hi all
i want to use metric tools library in inches
configuration.if i use change library here
the tool size is larger than the profile
ex:i want to drill a hole of Dia 0.3937 inches
with Dia 10mm drill bit
thanx
Sunder
hi
can i open and view any *.jpeg files
as we do with *.bmp files in screen/studio shading
if any alteration required in mcam cfg
kindly show the sequence
thanx
Reg
Sunder
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.