Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
We had a similar job with a 20 degree angle and could not find anything at the time so we had one made from Valenite,but OTM makes chamfer cutters with alot of different angles.
web page
I have not had a problem with this until today.When I post code on my finishing pass my linear feedrate is .004 ipr but on all arc moves it changes to 5 ipm,I have it check to adjust feedrate on arc moves in the CD but it has never changed to IPM feedrate.
[*]Mill X2-MR2
Solids
Lathe
[email protected]
Thermogauge Instruments
Do a search for Repository software,there is a good one out there but I can't recall the name It's about a thousand bucks,but there is also some open source stuff on Sourceforge.net.The software handles file versioning,check in, check out,read only and permissions.
[email protected]
[*]X2-MR2
Mill
Lathe
Solids
It used to be when I moved an entity my dimensions would update,now the dimensions stay where they are.Is there a setting for this,and if so where.
[*]X2-Mr2
Level 3
Lathe
Solids
[email protected]
I did a driver update for my Radeon video card and could not start mastercam until I restored windows back before update.
[email protected]
[*]X2-MR2
Solids
Lathe
I installed MR2 and set up my icons one to lathe
config one to mill config,but whenever I click on a icon it reverts back to the last used profile.I have use last definition button unchecked in both config files,I opened both config files in text editor and compared the differences it looks like everything that should be different is,I am pulling my hair out on this one.Never had trouble with shortcuts before.
[email protected]
Thermogauge Instruments
[*]X2-MR2
Mill
Lathe
Solids
When i backplot the toolpath on the ID it looks fine except for some toolpath lines that are creating a full circle at the end of the path, rough and finish cuts.Underneath the circles everything looks fine,but it posts code for the circles.These circles are not connected to anything.I am using MR 1
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.