I tried just as you specified with no luck check parameter 3404 bit 2 and set it to 1 It says Memory Start *** fin and sits there like its waiting for something.

I've followed the instructions from the thread and I get a blinking LSK that locks up the control when I try to read a file into memory from the data server. This is with IO set to 5. Really at a loss here not sure what's going on.

I've tried 1,2,3,4,5,and now 21. The manual seems to be no help it tells me how to setup the machine to run the pcmia card slot using channel 4, but nothing about the data server. Sorry for the dumb question, but what does f copy mean. I get to that option under the HDDir softkey, but what ever I try I get Format error.

Ok so I've tried 18 which would not let me change it to. said data out of range. Changed it to 21 and I get the same response it sits at the call m198 p1003 and says Memory Start *** fin. It just sits there like its trying to do something, but nothing happens.

HI guys, Its been a long time since I've posed on here, but I need your help. I've searched and found some info, but not what I need. I have a Kitamura 2xif with a Fanuc 16I-MD. I have a fast board or data server that I can ftp files to. The problem is I cannot run them. I've tried m198 p1003. With no avail. The machine io device is set to 4. Which I believe is the pcmia slot. I'm at a loss right now. Should I be changing the Il device to another number? If so which should it be? Any help would be greatly appreciated as I have a hot job that needs to be running... Thanks, ATG

Sorry I should have been more specific. I think originally I must have gotten the ops from tips for manufacting. It was all your spot drill tap, ops broken up to each size...Or maybie i got it here........I really dont remember anymore.......

Its been quite a while since ive visited this site. But I had a qustion about the tool ops. I used to have all my ops saved. Like my taps, roll form taps, ect. Do we have the ops saved somwhere that i can look at them again..... Thanks

"and in the printing settings of FF set the scale to "adapt to page"" Where is this setting located?

I tried both Internet explorer and Fox fire. There must be a setting somewhere. I've tried everything.......well everything except what works........Dang...........

I'm having problems getting x+ sheets to fit on a standard sheet. I've tried everything I can think of....Please Help

How much time do you think you saved? It would apear to be allot....Nice video

Does anyone currently use the bug plus holders from Kaiser of the dual contact holders? What are your experiences with these holders? Like's dislikes. I've heard the patent runs out on these holders next year is this true. Thanks

wheres the beef?

So when do we get to download it?