looks like all is posting as needed I appreciate the help!

I would like toolchange to post like this M36 T28 M37 T28 M06 currently is T15 M06 post reads ptlchg_com #Tool change common blocks pcom_moveb c_mmlt$ #Multiple tool subprogram call #ptoolcomment comment$ spaces$=0 if swcsplname <> snull, pbld, n$, pspc, "(WCS NAME - ", swcsplname, ")", e$ #if swcsplcomm <> snull, pbld, n$, pspc, "(WCS COMMENT - ", swcsplcomm, ")", e$ if rot_on_x & stoolplname <> snull, pbld, n$, pspc, "(TOOLPLANE NAME - ", stoolplname, ")", e$ #if rot_on_x & stoolplcomm <> snull, pbld, n$, pspc, "(TOOLPLANE COMMENT - ", stoolplcomm, ")", e$ #if rot_on_x & sconstplname <> snull, pbld, n$, pspc, "(CPLANE NAME - ", sconstplname, ")", e$ #if rot_on_x & sconstplcomm <> snull, pbld, n$, pspc, "(CPLANE COMMENT - ", sconstplcomm, ")", e$ #if stpgrpname <> snull, pbld, n$, pspc, "(TOOLPATH GROUP - ", stpgrpname, ")", e$ spaces$=sav_spc pcan if plane$ < 0, plane$ = 0 if stagetool >= zero, pbld, n$, *t$,e$ "M06", ptoolcomm, e$ spaces$=0 if use_op_cnt, n$, "

sorry, I have a question on editing post I need to add a M470 at the beginning of my program. I also need to change my tool change post to read as follows. M36 T28 M37 Before these two lines T28 M6 any help would be appreciated!

Hi,

I haven't seen memory buffering ever impact time.I have had 2 gb ram though. Thanks for response JParis I had hoped there was a log file saved somewhere.

How is every one clocking thier times I have been just using stop watch. I know there is a better way

that is my thought so far I usually backplot and verify everything. But you would think importing geometry and operation should give same results every time.

I have import library that is fairly extensive. Every once in a while I mean like 1 in 500 programs I will get an operation that will dive to program depth at x0 y0. Then it will generate toolpath that I was intending. To fix I only regenerate operation that has issue and dive goes away. It shows up in backplot and verify. I think it has only happened when I imported geometry with operation. Any thoughts would be appreciated.

That was my deduction I am planning on putting files in regen folder and deleting on weekly basis. Thanks for input

Hi all, I noticed that I am generating a regen file. I am curious what this file is for. I am debating deleting or not generating file. What are cons? Thanks

Thanks for input all, it seems that mastercam X loaded before last update,and then updated works fine. If loaded with latest version directly seems to not have all files. I copied OPMGRDISPLAY.PRM from computers that work and still no fix. For some reason it's not looking for file?

I think my original post is kind of confusing. I would like to clarify. I have problems with toolpath manager display options not retaining.

I only have problem in toolpaths manager window. Haven't had problems with other settings. I tried a search first did't see what I was looking for.

When I right click in my toolpaths window select display options unselect options to change view. Settings will not stay next time I open up mastercam. Anyone know how/where to save display options?

should be able to restart computer and move file before opening mastercam