I have gone through my reseller and have had some issues trying to get my post to output spindle speed on the Prototrak 3 axis DPM3. I am doing a surface scallop for a spaceship like part. I have an mx3 post but like I said, it fails to generate spindle speed. Any help with this would be great since the reseller is out to lunch and this job is hot!!

Ok, is this better? http://www.pcnation.com/web/details.asp?af...306&item=N27888

It is Nvidia. Thanks I think. Time to do some more research

Seeing how you lost me with the VGA vs DVI....I need help. I have a Quadro 1800 in one and a 1500 in the other.

Any suggestions as tyo which KVM switch to go with? I was looking at this http://www.kvms.com/Product/EXT-VGA-422.aspx

So the Nvidia Quatro 1800 does indeed have two ports?

Jay you lost me a bit. I am using the Dell 22" monitors. If I run a dual monitor KVM switch I just hook them both up to that right?

Yes, I was thinking of using the KVM switch that supports dual monitors...but how do I hook them up? Just run the monitors to the KVM switch? And will the graphics card be bogged down by the dual monitor set up?

Ok, I have two computers. One that is an online comouter for email, the other is our new programming box. It is offline. I have two new Dell Monitors. I curerently have one monitor run to each box and use a KVM switch to bounce the keyboard and mouse from one to the other. I would like to run dual monitors on each box, that way I have a bigger window to use Mastercam in..plus..it is just much cooler. I have a Quadro 1700 in he online box and a Quadro 1800 in the new box. What else would I need to accomplish this so that I can have dual monitors on each box other than a dual monitor KVM switch? I hope I stated this clear enough. I am not a computer genius but know enough to get in trouble.

Got rid of the temp files and re ran Benchtest #3- 1' 03"

Hmm, what temp files? Where are they located? What I did was I re-opened the drawing and did not save the changes. Then I made the appropriate changes and regened the part.

Just shut down Solidworks and re ran the test and hit 50 seconds.

1 MIN 28 SECONDS Dell Precision T3500 Intel Xeon W3503@ 2.4GHz 6 GB RAM Windows Vista 64 NVIDIA Quadro 1800

I ran the uninstall and for some reason the folder for X4 was still there and I did not notice it. I deleted it and ran it again and all is good. I guess I will just continue to rebuild my config file upon installing a new release. Thanks guys

An error that was associated with the chooks/zip2go As for deleting the install files..I am unsure as to what you mean. I used the CD to uninstall MC and the did a regedit to delete the CNC software folders.