Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hi,
Thanks for your reply,Peter Scott & SwollenProstate. I used the Peter Scott's way to de-selected the "Assign Tool Numbers Sequentially" and it ok now.
dnguyen
Anyone can help me please,the reason is when I try to copy the "tool,op" from the Operation Import
all the tool number had changed, it like in OPeration Import tool is #2 after I copy it to the Operation Manager tool changed to #1,any sugestion
thanks
Hello all,
Can anyone help me to slow down the feed rate? Last friday I have the trouble with the corner radius, when i do the pocket the feed rate I set at 90 IPM, when the tool get into the corner feed rate is too high so it make my radius biger.Is there anyway to reduce the feed rate at the corner?
Sincery,
dnguyen
YOu have cheated on the drill parameter Felix,Tool dia key in=.500, Depth= .00,and on the Tip compensation, Tip angle=82 deg,break through amount=.00
dnguyen
Hi all,
Sometime I have the trouble with Toolpath/surface/finish/flowline.
The message said.
"Selected driver surface do not form a row"
Any suggestion to fix this problem?
dnguyen
Postman,
Thanks for quick reply,
I have already change the "Z initht" it work good
now.
once again thanks for help.
This is the Psof.
dnguyen
code:
psof0 #Start of file for tool zero
psof
psof #Start of file for non-zero tool number
pcuttype
toolchng = one
if ntools = one,
[
#skip single tool outputs, stagetool must be on
stagetool = m_one
!next_tool
]
"%", e
"(PROGRAM NAME - ", progname, ")", e
"(DATE=DD-MM-YY - ", date, " TIME=HH:MM - ", time, ")", e
pbld, n, *smetric, e
pbld, n, *sgabsinc, "G80", "G40", *sgcode, e
sav_absinc = absinc
if stagetool >= zero, pbld, n, *t, "M6", e
if mi1 <= one, #Work coordinate system
[
absinc = one
pfbld, n, sgabsinc, *sg28ref, "Z0.", e
pfbld, n, *sg28ref, "X0.", "Y0.", e
pfbld, n, "G92", *xh, *yh, *zh, e
absinc = sav_absinc
]
else, pwcs
pcom_moveb
c_mmlt #Multiple tool subprogram call
ptoolcomment
comment
pcan
pindex
if mi1 > one, absinc = zero
pcan1, pbld, n, *sgcode, *sgabsinc, pfxout, pfyout, pfcout, e
pbld, n, *speed, *spindle, pgear, next_tool, strcantext, e
pbld, n, "G56", *tlngno, pfzout, scoolant, e
absinc = sav_absinc
pcom_movea
toolchng = zero
c_msng #Single tool subprogram call
ptlchg0 #Call from NCI null tool change (tool number repeats)
pcuttype
pcom_moveb
c_mmlt #Multiple tool subprogram call
comment
pcan
pbld, n, sgplane, e
if prv_spdir2 <> spdir2, pbld, n, *sm05, e
if prv_speed <> speed | prv_spdir2 <> spdir2,
pbld, n, *speed, *spindle, pgear, e
pbld, n, scoolant, e
if mi1 > one & workofs <> prv_workofs,
[
sav_absinc = absinc
absinc = zero
pbld, n, pwcs, e
pbld, n, sgabsinc, pfxout, pfyout, pfzout, pfcout, e
pe_inc_calc
ps_inc_calc
absinc = sav_absinc
]
if cuttype = zero, ppos_cax_lin
if gcode = one, plinout
else, prapidout
pcom_movea
c_msng #Single tool subprogram call
[ 12-17-2001: Message edited by: Dave Thomson ]
Hi Sem001,
I have the same problem with the Okuma post too,
This is the problem I have:
G90G80G40G0
G15H00
G0G90X-1.9743Y.9112A0.
S3000M3
G56H1Z2.
G71 initht 2.
G83X-1.9743Y.9112Z-2.R.2Q.1F15.
how can I modify in the post to change the "initht" to "Z" and "G15H00" to "G15H1?"
Any suggestion or advise you can give me
will be helpful.
Dnguyen
Hi Tony,
Would you mind to show me how to do the template
on the excel?Please! because I have the problem with the black color of the mastercam background when I do the Creen/next menu/to clipbrd,I have the whole screen is black, do I need
go to the Sreen /configure to set the system coloreverytime before I doing this?
thanks in advance
Dnguyen
Hi Jame,
I want to thin the flange on the L chanel that is 2.00 inches high , I want to cut .200 thousand
on the inside of the chanel and then go to the out side and cut .300 thousand until I get to
the bottom of chanel.( aluminum chanel)
Thank you for your reply
dnguyen
P.S. This help take some of the vagues out of my question.
Hi all
The flange thicknest is .060 and 2.00 inches high to stop the flexing
and I want to cut the .200 thousand for step down inside then jump
to the outside cut .300 thousand to continue stepping down until
reach to the bottom of flange.
Is there anyway easier to do this with the Mastercam?
Thanks for help
dnguyen
[ 12-04-2001: Message edited by: dnguyen ]
You can Create curve,all edge on the small fillet then you go to the Xform, Offsetcontour,and in offsetcontour parameter, you set it with 3D and distant key in .020" (for .250ballnose endmill)and Copy for 6 contours, click Done
after done that you go back on the Construction Plane set 3D Create, Line, End point,connect six contours into one,
go to Tool path, Contour,and the contour set for 3D,Compensation in computer and control set "Off"
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.