So what do we have to do if the programmers do not have solid works installed on their systems they have X6 spo 3 and X7 spo 2. And the designers have solid works 2014 spo 0 ? Do we need to copy the file from the designers system to the programmer computer? Thanks in advance.

My question is will this work for solid works 2014 sp0. Thanks

that worked for the m8. now I just need to figure out how to add the m9 to the first tool. thanks keith

yes it does.

I missunder stood the question I want m8 and m9 at every tool change sorry about that.

Yes it is set to that. this all started with X5 and haveing to change from x style coolant. with x style if I force coolant it comes out right. but when I chang back to support old coolant it will not work.

Both thanks

Here it is. (T1 - 3.0 FACE MILL - H1 - D1 - D3.0000") (COMPENSATION TYPE - COMPUTER) N1 T1 M06 ( 3.0 FACE MILL ) (MAX - Z1.) (MIN - Z0.) (Z STOCK TO LEAVE = 0.) G00 G54 G90 G49 G80 G40 G17 G101 M31 G00 X-4.5992 Y.4926 S6500 M03 G43 H1 Z1. M08 Z.1 G01 Z.01 F65. X6.0265 Y-1.5372 X-4.5992 G00 Z.1 Y.4926 G01 Z0. X6.0265 Y-1.5372 X-4.5992 G00 Z1.------------- no m9 M05 G0G53G49Z0. G100X0.Y0. M33 G0X0.Y0. M01 (COMPENSATION TYPE - COMPUTER) N2 T1 M06 ( 3.0 FACE MILL ) (MAX - Z1.) (MIN - Z0.) (Z STOCK TO LEAVE = 0.) G00 G54 G90 G49 G80 G40 G17 G101 M31 G00 X-4.5992 Y.4926 S6500 M03 G43 H1 Z1. T1 ------------------------------no m8 Z.1 G01 Z.01 F65. X6.0265 Y-1.5372 X-4.5992 G00 Z.1 Y.4926 G01 Z0. X6.0265 Y-1.5372 X-4.5992 G00 Z1. M09 M05 G0G53G49Z0. G100X0.Y0. M33 G0X0.Y0. M30 M02

No that did not work thanks for trying

Hello, How would I go about modifying the mpmaster to turn this off? Don't output an on code for a coolant that is already on. So it will turn on at a tool change even though it is the same tool. Thank you,

So is their something we can fix in the mpmaster to get x style tools to work again?

I think it has somthing to do with the X coolants in the mpmaster.

Same thing happen to me I am using mpmaster and now none of my coolant codes work. worse part is i would turn them back on in the tool edit and they would not stick so i had to change the machine def to support older tools. And then it would stick when i edited the tool.

DOWNLOAD IS UP

thanks tony that does like what is happening.

thanks everyone. going to try that. I would like to figure out what causing it in the first place. We have converted all tool files to x4 coolant.And it does not happen all the time so it is hard to track down. but thanks

thanks That is what we have been doing. but the new guys keep forgetting to do it.

Hi I have a quick question, how would I force a m08 at every tool change in the mp master for x4? We have had problems with tool coolant turning off when importing operations. So I would like to hard code it into the post. thanks

Awsome Thank Thad i will give it a try

Good morning everyone, Anyway we are trying to figure out what we need to modify in the post to add 50 to all D numbers for a Makino or if it even possible. We really do not want to do it through the MMD because we post out the same program for our Hass. thanks for any help.

backplot looks fine it virafys great but the message comes up when i post it out i tend to think it has somthing to do with the machine deff file. thanks

trying to update our post to the inhouse one but when we post the nc file we get this message. SELECT MACHINE ACHIEVABLE TOOLPLANE WITH Y- AXIS ALONG MACHINE Y Thanks fo any advice.

Hi everyone, We have been running x4 mu1 on four system for a week now. All four have the same problem when you select a LH tool from the library it will not switch spindle direction to ccw. Has anyone notice this problem. Any help will be appreciated. thanks

Mine happens when I open a file that was fine. The geomitry is still thier in the toolpath. But it comes in locked and with the repair message on it.

I am getting this too. After I save a file and reopen it. I have been unlocking it and reginning and saving it and it opens fine.