Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
first off updated tools from x2 to x3.
now i will explain better.
when i start a new part file and go to create the very first operation and select a tool from libary it comes in as number two.and next tool comes in as number onethan three.but if i start the first operation and create a tool it comes in as number one.
post is fine matches tool number in operations.
thanks
everyting is good except when i start a operation first tool number always comes in #2 than next tool is #1and i have assign tool numbers sequentially on any thoughts on this.
thanks
Does a wide screen monitor effect mastercam? Our engineers say they cannot use one and I think I can for mastercam and inventor without distortion. I can buy a bigger widescreen for less than a regular monitor.
Thanks,
this is a updated v9 post i am trying to get a /
between the tool number and tool offset
this is a updated ezpath post
i can get it before or after just not where i need it any help would be very appreceated.
N10G90G0X10.Z10.
N20T0202M6 N20T02/02M6
N30S500M03
N40G0X1.9715Z-1.838M8
N50Z.2109
N60G99G1Z.1109F.005
N70X2.2404Z.0538
N80Z-.005
N90Z-.1298
N100X1.9683Z-.2658
toolno = t$ * 100 + tloffno$
pbld, n$, *toolno, "M6", e$ i tried modifing this line
pcom_moveb #Reset machine position, set
I have the geforce 7900 gt/gto 256 mb on my system right now and it is slow when I translate other than that it seems fine. Or the Nvidia Quadro fx 560 256 mb that I just got from our computer guys. I think the Quadro, and will the drivers on the disk be good? thanks guy"s
I am running x2 mr2 ug's nx 4.0 and inventor 2008
Okay I will be working everything going fine. Then all my planes will screw up and they say not saved.So then no trimming or xform.And backplot will come up with a profile not correct. After this happens.So I save and reopen the file, maybe a couple of times then everything is back to normal.Any suggestion will be gratly apprecated.I only can get on the net at breaks so I might not reply tell then anyway thanks
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.