-
Posts
1,281 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Files posted by Webby
-
Advanced Multiaxis Training Tutorial Downloads
By Webby in Mastercam X4
These files are intended for those who have purchased the Mastercam X4 Advanced Multiaxis Training Tutorial, available in print form here and eBook form here.
Included files for the Mastercam X4 Advanced Multiaxis Training Tutorial:
Tutorial 1:
Tut 1 PROJECT5 AX_GEOMETRY.MCX Tut 1 PROJECT5 AX_TOOLPATH.MCX
Tutorial 2:
Tut 2 PORT_GEOMETRY.MCX Tut 2 PORT_TOOLPATH.MCX
Tutorial 3:
Tut 3 MOLD BOTTLE_GEOMETRY.MCX Tut 3 MOLD BOTTLE_TOOLPATHS.MCX
Tutorial 4:
Tut 4 TURBINE BLADE_GEOMETRY.MCX Tut 4 TURBINE BLADE_TOOLPATH.MCX
Tutorial 5:
Tut 5 WORM GEAR GEOMETRY.MCX Tut 5 WORM GEAR_TOOLPATHS.MCX
Tutorial 6:
Tut 6 GOUGE CHECK STRATEGIES_ TOOLPATHS.MCX Tut 6 GOUGE CHECK STRATEGIES-GEOMETRY.MCX
24,832 downloads
Updated
-
How to Install a Post Processor
By Webby in Post Processor 'How To' Info
This document explains how to install a post processor for Mastercam X7. If you have a post for a previous version of Mastercam installed, see "X7 Post Update Notes" for instructions on how to update your post instead.
5,472 downloads
0 comments
Submitted
-
Educational Posts - Mastercam X3
By Webby in Educational Post Processors
Mastercam X3 Post Processor Files for commonly used Educational market machine tools.
Post Processors are provided "As Is", with no guarantee of functionality. Direct feedback - but not post requests - to our Post Department.
Click "Download File" below to download the following files:
A Microsoft Word document detailing how to install and set up your post for Mastercam X3. A Mastercam X3 Techno Machine Post Processor
1,785 downloads
Submitted
-
Advanced Multiaxis Training Tutorial Downloads
By Webby in Mastercam X5
These files are intended for those who have purchased the Mastercam X5 Advanced Multiaxis Training Tutorial, available in print form here and eBook form here.
Included files for the Mastercam X5 Advanced Multiaxis Training Tutorial:
Tutorial 1:
TUTORIAL 1 PROJECT5 AXIS.MCX-5
Tutorial 2:
TUTORIAL 2 SWARF.MCX-5
Tutorial 3:
TUTORIAL 3 FINISH BLADE SURFACES.MCX-5
Tutorial 4:
TUTORIAL 4 IMPELLER WITHOUT TILT CURVE.MCX-5 TUTORIAL 4 IMPELLER WITHOUT TILT CURVE.STL
Tutorial 5:
TUTORIAL 5 COLLISION CONTROL STRATEGIES.MCX-5
Tutorial 5:
TUTORIAL 6 PORT_EXPERT.MCX-5
3,993 downloads
Updated
-
Intro to Multiaxis Training Tutorial Downloads
By Webby in Mastercam X5
These files are intended for those who have purchased the Mastercam X5 Intro to Multiaxis Training Tutorial, available in print form here and eBook form here.
Included files:
Updated 13/12/2010 to include the toolpaths on the file provided for Tutorial 7 as required by the book.
LOGO X5.MCX-5
Tutorial 1:
TUTORIAL 1_CONICALHELIX .MCX-5
Tutorial 2:
TUTORIAL 2 .MCX-5
Tutorial 3:
TUTORIAL 3.MCX-5
Tutorial 4:
TUTORIAL 4.MCX-5
Tutorial 5:
TUTORIAL 5.MCX-5
Tutorial 6:
TUTORIAL 6.MCX-5
Tutorial 7:
TUTORIAL 7.MCX-5
Tutorial 8:
TUTORIAL 8.MCX-5
Tutorial 9:
TUTORIAL 9.MCX-5
Tutorial 10:
TUTORIAL 10.MCX-5
Tutorial 11:
TUTORIAL 11.MCX-5
3,481 downloads
Updated
-
G76 Thread Cycle Generator
This is a free utility written by MTB Technical Services that generates the cycle data correctly for whatever thread you need. It's especially helpful for tapered threads.
It's the perfect companion to the Vargus TT-GEN app and can only help people get more comfortable with G76. Keep in mind that this utility is just a simple little tool for properly formatting the output from the data you enter. If you're cutting anything other than a standard UN/ISO Thread, you'll need to know the proper radial thread depth.
The input fields will evaluate expressions so if you have a 4-Pitch API thread you can simply type 1/4 in the input field and it will evaluate to 0.25. The Taper angle will also evaluate the trig needed based on the known taper per foot. For an API Thread with 2" of Taper per foot, you can enter atn(1/12) or atan(1/12) to get the actual per-side angle value.
Visit the MTB Tech Blog for more CNC Engineering, CAD/CAM and software development posts.
1,755 downloads
0 comments
Updated
-
Mastercam/CNC Curriculum Downloads
By Webby in Mastercam X2
These files are intended for those who have purchased the Mastercam X2 CNC Curriculum, available in print form here.
The following files are included in the .zip file:
GRADEMAKER INSIDE SHAPE.MCX Smily face.bmp
900 downloads
Updated
-
Design Training Tutorial Downloads
By Webby in Mastercam X4
These files are intended for those who have purchased the Mastercam X4 Design Training Tutorial, available in print form here and eBook form here.
Included files for the Mastercam X4 Design Training Tutorial:
Tutorial 17:
TUTORIAL17_EXERCISE.MCX
Tutorial 18:
TUTORIAL18_EXERCISE.MCX TUTORIAL18_WIREFRAME.MCX
1,857 downloads
Updated
-
Mastercam V9 to X5 Transition Guide
By Webby in Tips & Guides
Details the procedures Mastercam Version 9 users should follow to update their settings, libraries, parts, and posts to Mastercam X5.
Also included is the updated V9 to X function Map that maps each Mastercam Version 9 function to its corresponding Mastercam X5 function.
3,467 downloads
Updated
-
Project Workbook Downloads
By Webby in Mastercam X2
These files are intended for those who have purchased the Mastercam X2 Project Workbook, available in print form here.
Included files for the Mastercam X2 Project Workbook:
CARTEMPX2.MCX GOLFERX2.MCX HOCKEY_PLAYERX2.MCX
1,229 downloads
Updated
-
Mill Training Tutorial Downloads
By Webby in Mastercam X2
These files are intended for those who have purchased the Mastercam X2 Mill Training Tutorial, available in print form here.
Included files for the Mastercam X2 Mill Training Tutorial:
TUTORIAL14EXERCISE.MCX TUTORIAL15_WIREFRAME.MCX TUTORIAL15EXERCISE.MCX
2,716 downloads
Updated
-
Instrucctor Guide for Mill, Lathe & Solids
By Webby in Mastercam X2
Included files for the Mastercam X2 Instructor Guide for Mill, Lathe & Solids:
Training_Exercise_x2
ANALYZE .MCX
ANALYZE CHAIN.MCX
ATTRIBUTES.MCX
BREAK-JOIN.MCX
CHAIN1.MCX
CHANGE ATTRIBUTES.MCX
CREATE_ARC.MCX
CREATE_ARC_POLAR.MCX
CREATE_ARC_TANG.MCX
CREATE_LINE_TANGENT.MCX
CREATE_LINES.MCX
CREATE_POINT_POS.MCX
CREATE_RECTANGLE.MCX
FILLET.MCX
LEVELS.MCX
MIRROR.MCX
OFFSET.MCX
POLYGON.MCX
ROTATE.MCX
TRANSLATE.MCX
TRIM.MCX
Surface_Training_Exercises_x2
CPLANE-NORMAL.MCX
CPLANES ENTITY - ROTATE.MCX
CUBE.MCX
CURVES.MCX
NET SURFACE.MCX
NET.MCX
NET-SWEPT.MCX
RULED-SYNC.MCX
SURFACING_4.MCX
SURFACING_7.MCX
TUTORIAL15_WIREFRAME.MCX
TUTORIAL15_WIREFRAME-EXERCISE.MCX
Solids_Training_Exercises_x2
CPLANE-NORMAL.MCX
CPLANES ENTITY - ROTATE.MCX
CUBE.MCX
Lathe_Training_Exercise_x2
ANALYZE CHAIN.MCX
ANALYZE.MCX
BREAK-JOIN.MCX
CHAIN.MCX
CHAMFER.MCX
CHANGE ATTRIBUTES.MCX
CREATE_LINES.MCX
CREATE_POINT_POS.MCX
FILLET.MCX
MIRROR.MCX
OFFSET.MCX
TRIM.MCX
2,361 downloads
Updated
-
Mastercam/CNC Curriculum Downloads
By Webby in Mastercam X3
These files are intended for those who have purchased the Mastercam X3 CNC Curriculum, available in print form here.
Included files for the Mastercam X3 Mastercam/CNC Curriculum - Volume 3:
Stallion.bmp Sunset.bmp Vacation.bmp
2,853 downloads
Updated
-
Mill Level 1 Professional Courseware Downloads
By Webby in Mastercam X4
These files are intended for those who have purchased the Mastercam X4 Mill level 1 Professional Courseware, available in print form here and eBook form here.
Included files for the Mastercam X4 Mill Level 1 Professional Courseware:
2DPOCKET.MCX ANALYZE .MCX ANALYZE CHAIN.MCX ATTRIBUTES.MCX BREAK.MCX CHAIN1.MCX CHAMFERPART2D.MCX CHANGE ATTRIBUTES.MCX CIRCMILL.MCX CONTOUR.MCX CREATE_ARC.MCX CREATE_ARC_POLAR.MCX CREATE_ARC_TANG.MCX CREATE_LINE_TANGENT.MCX CREATE_LINES.MCX CREATE_POINT_POS.MCX CREATE_RECTANGLE.MCX CUBE.MCX FACE.MCX FBM_EXERCISE.MCX FILLET.MCX Geometry.IGS HIGH SPEED EXERCISE.MCX JOIN.MCX LEVELS.MCX MIRROR.MCX OFFSET.MCX OPEN CONTOUR ONEWAY ZIGZAG.MCX OPEN CONTOUR ONEWAY.MCX OPEN POCKET.MCX part1.SLDPRT part2.SLDPRT PEEL_MILLING.MCX POLYGON.MCX ROTATE.MCX SOLID DRAWING2.MCX TRANSLATE.MCX TRIM.MCX WIREFRAME_RULED.MCX WIREFRAME_SWEPT.MCX
1,078 downloads
Updated
-
Mastercam X4 Handbook Volume 3 (PDF)
The Handbook series takes a top-down theoretical approach to teaching Mastercam. Concepts and essential knowledge are included along with practical applications. You not only learn how to use Mastercam, but why things work as they do.
The Mastercam Handbook Volume 3 covers all multiaxis machining functions, including Drilling 5-axis, Curve 5-axis, Swarf 5-axis, Multiaxis Flowline and Multiaxis Multisurfaces. The book also covers useful information about Advanced Multiaxis Toolpaths and the Multiaxis Post processor.
0 comments
Updated
-
Mastercam X4 Instructor Guides for Mill & Lathe (PDF)
By Webby in Instructor Kits
These are the eBook variants of our Instructor Guides; a component in our X4 Instructor Kit for Mill and Lathe. They come as a bundle for Mill Level 1 (2D) Mill Level 3 (3D) and Lathe in one PDF file. When purchased, the full Instructor Kit includes these as well as each of the associated Training Tutorial eBooks, software and Instructor Files.
The Mastercam X4 Instructor Kit for Mill & Lathe is the ultimate toolkit for instructors looking to enhance their 2D mill, 3D mill and lathe classes while minimizing prep time. Built upon the experience gleaned from the last 20+ years in the business and teaching Mastercam to thousands of people during that time, this kit is designed to get any willing individuals designing and creating toolpaths as quickly as possible.
0 comments
Updated
-
Instructor Guide Files for Mastercam X4 Instructor Kit
By Webby in Mastercam X4
These files are available to download for those who have purchased the eBook version of the Mastercam X4 Instructor Kit for Mill & Lathe. They are referenced within, and designed to accompany the Instructor Guides which are a part of the Instructor Kit. If you bought the print version, these files would be packaged on the Instructor CDs.
The files included in this download are for all three Instructor Guides; Mill Level 1, Mill Level 3 and Lathe.
If you do not have Microsoft PowerPoint for the included PowerPoint presentations or you are having issues with an older version, a free PowerPoint Viewer is available for download directly from Microsoft.
Updated
-
Instructor Guide Files for Mastercam X4 Metric Instructor Kit
By Webby in Mastercam X4
These files are available to download for those who have purchased the eBook version of the Mastercam X4 (Metric) Instructor Kit for Mill & Lathe. They are referenced within, and designed to accompany the Instructor Guides which are a part of the Instructor Kit. If you bought the print version, these files would be packaged on the Instructor CDs.
The files included in this download are for all three Instructor Guides; Mill Level 1, Mill Level 3 and Lathe.
If you do not have Microsoft PowerPoint for the included PowerPoint presentations or you are having issues with an older version, a free PowerPoint Viewer is available for download directly from Microsoft.
Updated
-
Mastercam X4 Metric Instructor Guides for Mill & Lathe (PDF)
By Webby in Instructor Kits
These are the eBook variants of our Instructor Guides; a component in our X4 (Metric) Instructor Kit for Mill and Lathe. They come as a bundle for Mill Level 1 (2D) Mill Level 3 (3D) and Lathe in one PDF file. When purchased, the full Instructor Kit includes these as well as each of the associated Training Tutorial eBooks, software and Instructor Files.
The Mastercam X4 Metric Instructor Kit for Mill & Lathe is the ultimate toolkit for instructors looking to enhance their 2D mill, 3D mill and lathe classes while minimizing prep time. Built upon the experience gleaned from the last 20+ years in the business and teaching Mastercam to thousands of people during that time, this kit is designed to get any willing individuals designing and creating toolpaths as quickly as possible.
0 comments
Updated
-
Instructor Guide Files for Mastercam X5 Instructor Kit
By Webby in Mastercam X5
These files are available to download for those who have purchased the eBook version of the Mastercam X5 Instructor Kit for Mill & Lathe. They are referenced within, and designed to accompany the Instructor Guides which are a part of the Instructor Kit. If you bought the print version, these files would be packaged on the Instructor CDs.
The files included in this download are for all three Instructor Guides; Mill Level 1, Mill Level 3 and Lathe.
If you do not have Microsoft PowerPoint for the included PowerPoint presentations or you are having issues with an older version, a free PowerPoint Viewer is available for download directly from Microsoft.
Updated
-
Mastercam X5 Instructor Guides for Mill & Lathe (PDF)
By Webby in Instructor Kits
These are the eBook variants of our Instructor Guides; a component in our X5 Instructor Kit for Mill and Lathe. They come as a bundle for Mill Level 1 (2D) Mill Level 3 (3D) and Lathe. When purchased, the full Instructor Kit includes these as well as each of the associated Training Tutorial eBooks, software and Instructor files.
The Mastercam X5 Instructor Kit for Mill & Lathe is the ultimate toolkit for instructors looking to enhance their 2D mill, 3D mill and lathe classes while minimizing prep time. Built upon the experience gleaned from the last 20+ years in the business and teaching Mastercam to thousands of people during that time, this kit is designed to get any willing individuals designing and creating toolpaths as quickly as possible.
0 comments
Updated
-
Mastercam X5 Art Training Tutorial (PDF)
By Webby in Training Tutorials (Imperial)
The Mastercam X5 Art Training Tutorial book has 7 new inspiring projects which cover geometry creation, importing images from the art library and importing files. Surface creation, tool settings, proper stock setup and toolpath creation is also illustrated in a new well-organized layout.
Updated
-
Mastercam X5 Design Training Tutorial (PDF)
By Webby in Training Tutorials (Imperial)
The Mastercam X5 Design Training Tutorial provides a comprehensive step-by-step approach to learning Mastercam Design. The book's 17 tutorials now feature completely new parts and a clean new layout, making it easier than ever to follow. Each tutorial walks through all the procedures required for each part's geometry creation.
0 comments
Updated
-
FANUC Macro-B Engraving Application for Windows
This is a free utility written by MTB Technical Services for a local Machine Tool Distributor. It makes it easy to generate Engraving programs for your FANUC Controlled Mill. It includes the Macro-B files as well as an intuitive interface for generating NC code for engraving very quickly.
Visit the MTB Tech Blog for more CNC Engineering, CAD/CAM and software development posts.
1,552 downloads
0 comments
Updated
-
Mastercam X5 Wire Training Tutorial (PDF)
By Webby in Training Tutorials (Imperial)
The Mastercam X5 Wire Training Tutorial provides users with an excellent resource for learning Mastercam Wire. This practical set of tutorials focuses on 2D & 3D geometry, Wirepath creation such as Contour Wirepath (open contour, multiple contours, die and taper angle), 4-Axis Wirepath and No Core Wirepath.
Each tutorial guides users from geometry creation right through to G-Code generation. Additionally, the Wire Tutorial includes 6 mechanical part projects providing step-by-step instruction for Mastercam Wire, with each section containing screen shots and windows/menus for Wire/Power, Cut Parameters, Compensation, Stops, Leads, Taper, and more.
0 comments
Updated